[mythtv-users] Seagate 1.5TB for 109.99
John Drescher
drescherjm at gmail.com
Thu Mar 26 19:10:05 UTC 2009
On Thu, Mar 26, 2009 at 2:54 PM, Steve Peters - Priority Electronics
<steve at priorityelectronics.com> wrote:
>>Consider that the number might be bogus. I have 2 seagate 750GB that
>>claim many PENDING sectors (which should generate read errors), one of
>>them over 3000...
>>
>>There are no such sectors. I've dd'ed the whole drive and checked via
>>mdadm several times. The SMART response is just wrong.
>>
>>_______________________________________________
>
>
> How do you guys find this info out? I have 2 seagate 750GB drives and am now
> very curious.
> -Steve
>
Install smartmontools
and
use smartctl
fileserv ~ # smartctl --all /dev/sda
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA family
Device Model: WDC WD2500JD-00HBB0
Serial Number: WD-WCAL73927220
Firmware Version: 08.02D08
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Mar 26 15:09:04 2009 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an
interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (7275) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 126 122 021 Pre-fail
Always - 6208
4 Start_Stop_Count 0x0032 100 100 040 Old_age
Always - 103
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 056 056 000 Old_age
Always - 32573
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 103
194 Temperature_Celsius 0x0022 105 091 000 Old_age
Always - 45
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age
Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age
Always - 197
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 24740 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
fileserv ~ #
More information about the mythtv-users
mailing list