[mythtv-users] How to have 2 pvr150's with 2 ir blasters active?
gyrlla22 at gmail.com
Wed Sep 24 04:37:53 UTC 2008
I don't know enough about lirc to help you with this, but I was curious to
know if you got this to work. I never got my pvr-150 ir blaster to function
- the furthest I got was getting the blaster to emit light, but I was never
quite able to control my DCT2524 STB. I ended up just buying a separate ir
In case you are still working on this problem, and if you have not already,
you should check to see if both pvr-150 work with their corresponding ir
blasters in a system that would have only ONE pvr-150 before trying to get
both working together. This would verify that your problem is not hardware
On Fri, Sep 12, 2008 at 11:53 PM, Rick <rbonafied at gmail.com> wrote:
> I'm running Mandriva 2008.1 220.127.116.11-desktop-1mdv with my own compiled
> version of myth (svn.021-fixes). Everything is working great, that is
> until I decided to try out the IR blasters.
> I've been following the various guides on getting lirc compiled to use
> the blaster firmware. I have a single blaster working just fine.
> However, when I plug in the second ir blaster to the second pvr-150 I
> don't find that it is recognized. I hope I'm missing something obvious
> and just need some fresh advice.
> To recap just a bit:
> On boot the modules 'lirc_dev' and 'lirc_pvr150' are loaded fine.
> I only see a single /dev/lirc0 device file. I think I should see two
> if both remote dongles (with blaster) were active. Is that true?
> Any suggestions?
> Output from log:
> Sep 12 23:43:45 myhost kernel: lirc_dev: IR Remote Control driver
> registered, major 61
> Sep 12 23:43:45 myhost kernel: lirc_pvr150: chip found with RX and TX
> Sep 12 23:43:45 myhost kernel: lirc_dev: lirc_register_plugin:
> sample_rate: 0
> Sep 12 23:43:45 myhost kernel: lirc_pvr150: firmware of size 302355 loaded
> Sep 12 23:43:45 myhost kernel: lirc_pvr150: 743 codesets loaded
> Sep 12 23:43:45 myhost kernel: lirc_pvr150: Hauppauge PVR-150 IR
> blaster: firmware version 1.3.0
> Sep 12 23:43:45 myhost kernel: lirc_pvr150: ivtv i2c driver #1: no
> devices found
> mythtv-users mailing list
> mythtv-users at mythtv.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users