[mythtv-users] Problem with tunercard
Per Jørgensen
myth at pbj-design.dk
Wed Oct 22 08:41:37 UTC 2008
Hey group.
I have a strange problem with my card (Hauppauge HVR-4000)!
I have the DVB-S Input connected to a DISCeQ with 2 LNB's.
And that's the only card I got connected. When showing Input sources, I
got the 2 different input (port1 and port2) on the DVB:0!
Underneath there's a new DVB:0 input Source ??? It seems to me like it
counting this package along with the other 2 cards, Caurse running a
MythTV-status , as I got during Login - I'm getting this :
####################################################
MythTV status for localhost
===========================
Status...........: Wed Oct 22 2008, 10:20 AM
Total Disk Space.: Total space is 191,421 MB, with 16,190 MB used (8.5%)
Next Recording In: Never
Encoders:
core (1) - Idle
core (2) - Idle
core (3) - Idle
####################################################
As you can see I got 3 tuner sources?
And when running a select * from capturecard - it gives me this:
| cardid | videodevice | audiodevice | vbidevice | cardtype |
defaultinput | audioratelimit | hostname | dvb_swfilter | dvb_sat_type |
dvb_wait_for_seqstart | skipbtaudio | dvb_on_demand | dvb_diseqc_type |
firewire_port | firewire_node | firewire_speed | firewire_model |
firewire_connection | dbox2_port | dbox2_httpport | dbox2_host |
signal_timeout | channel_timeout | dvb_tuning_delay | contrast |
brightness | colour | hue | diseqcid | dvb_eitscan |
+--------+-------------+-------------+-----------+----------+--------------+----------------+----------+--------------+--------------+-----------------------+-------------+---------------+-----------------+---------------+---------------+----------------+----------------+---------------------+------------+----------------+------------+----------------+-----------------+------------------+----------+------------+--------+-----+----------+-------------+
| 1 | 0 | | | DVB | DVBInput
#1 | NULL | core | 0 | 0
| 1 | 0 | 0 | NULL
| 0 | 2 | 0 | NULL
| 0 | 31338 | 80 | NULL
| 60000 | 62500 | 0 | 0
| 0 | 0 | 0 | 1 | 1 |
| 2 | 0 | NULL | NULL | DVB | DVBInput
#1 | NULL | core | 0 | 0
| 1 | 0 | 0 | 0
| 0 | 2 | 0 | NULL
| 0 | 31338 | 80 | NULL
| 60000 | 62500 | 0 | 0
| 0 | 0 | 0 | 1 | 1 |
| 3 | 0 | NULL | NULL | DVB | DVBInput
#1 | NULL | core | 0 | 0
| 1 | 0 | 0 | 0
| 0 | 2 | 0 | NULL
| 0 | 31338 | 80 | NULL
| 60000 | 62500 | 0 | 0
| 0 | 0 | 0 | 1 | 1 |
+--------+-------------+-------------+-----------+----------+--------------+----------------+----------+--------------+--------------+-----------------------+-------------+---------------+-----------------+---------------+---------------+----------------+----------------+---------------------+------------+----------------+------------+----------------+-----------------+------------------+----------+------------+--------+-----+----------+-------------+
How i the setup can I make this - I've triede several times to delete
all tunercards! Afterwards only connect the One card
DVB:0 --> Switch ->2LNB's
And if I got these settings - How should I set this up in recording groups.
And allso
how come I got NULL in audiodevice - vbidevice - or should I in all make
some changes in my setup for making this rigth!
Normally I had a PVR-500 also but htey keept switching places - but can
I make t5his rigth so first of all I only got 2 Input sources ? and then
adding for each extra Card I'm putting into the backend.
So how should I otherwise set up a DVB-S inout with a switch and 2
LNB's - but why is there suddenly 3 recorders instead of 2 !
Thanks
Per Jørgensen
More information about the mythtv-users
mailing list