[mythtv-users] SA4250 firewire channel change suddenly stopped working

[Scott Bickford]

I am having some problems with this now.  It works ok on channels 0-9, but
when I go above that it seems to put the last number in the front such as 23
becomes 323.  Also, the process on the STB LCD appears to only get  a 2,
then it clears ( almost like it's starting over) and then it receives  a
323.

./sa4250 23 -v
node 0: vendor_id = 0x000090a9 model_id = 0x00000000
node 1: vendor_id = 0x00001ac3 model_id = 0x000010cc
Device acquired on node 1
Changing channel 23
AV/C Command: cmd0=0x00487ce7 cmd1=0x04001700 cmd2=0xff000000
AV/C Command: cmd0=0x00487c67 cmd1=0x04001700 cmd2=0xff000000


I don't know c  well enough to figure this one out.

I attached the source file I have hacked up.

I'd appreciate help with this.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20081101/30f2b40f/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sa4250.c
Type: text/x-csrc
Size: 5444 bytes
Desc: not available
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20081101/30f2b40f/attachment.c