[mythtv-users] DViCO FusionHDTV 5 Lite, Latest Kernel Drivers, & Video Corruption

[Sebastien Astie]

I had the same problem tuning QAM with my HDHR but only on a few channels.

I turned out to be due to a rf amplifier at the distribution point in my
house.
Once I changed the amplifier with one provided by the cable company I didn't
have as much corruption, it was a huge improvement.
then I changed all my coax cables with coax cables from blue jeans cable
http://bluejeanscable.com and my picture quality was perfect.


On Sat, Jun 7, 2008 at 11:38 AM, Matthew Redmon <mredmon at gmail.com> wrote:

> Hi!  I've been trying to get my two DViCO FusionHDTV 5 Lite cards working
> with a new install of FC9.  Everything seems to work just fine except that
> the video I get from the cards is corrupt (see video at:
> http://www.youtube.com/watch?v=rH1tsiPB8us).  I know the cards are fine,
> as they worked on this machine previously using FC5 and they currently work
> if I boot into Windows XP.
>
> I am using the drivers included in the 2.6.25.3-18 kernel to record QAM-256
> cable from Comcast in Seattle, WA.
>
> The cards are correctly auto-detected as card 135 with tuners 0043 & 0061.
> I scanned for channels using dvb-apps and used a script to cut down the ~250
> channels found to just those that would tune (presumably, the unencrypted
> channels).  Of those 56, they all have the corruption seen in the video.
>
> Any ideas?  Anybody have one of these cards working with a recent kernel?
>
> Thanks!
>
> ~Matt
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20080607/6ca82068/attachment.htm