[mythtv-users] No sound on 1 of 3 pvr250s on a single channel

[Brian Foddy]

My parents are reporting that card #1, a pvr250 of 3 total, whenever it
is programmed to record channel 13, there is no audio.  If any of the
other cards (all 250's) record 13 the audio is fine.  If card 1 records any
other channel its also fine.

I've copied a few seconds of an example file up and played it with
mplayer, no audio there either.  mplayer doesn't show anything 
unusual in its console output for audio either.

I've checked the backend.log and syslogs and don't see anything 
of note.  Below I've included the last syslog init of this card.

Backend details:
ivtv driver 0.10.1
linux 2.6.19.7
AMD XP 2500, Mandriva 2007 PP i586
3 pvr250 cards
2 HD3000 cards

I don't know if I'm looking at a bad card, and bad channel database entry,
driver / firmware mismatch, or something else.  This may need to
be reposted on the ivtv forum, but I thought I'd start here.  Any thoughts?

Thanks,
Brian



May  9 21:53:04 pvr kernel: ivtv:  ==================== START INIT IVTV 
====================
May  9 21:53:04 pvr kernel: ivtv:  version 0.10.1 (tagged release) loading
May  9 21:53:04 pvr kernel: ivtv:  Linux version: 2.6.19.7_bkf2 mod_unload K7
May  9 21:53:04 pvr kernel: ivtv:  In case of problems please include the 
debug info between
May  9 21:53:04 pvr kernel: ivtv:  the START INIT IVTV and END INIT IVTV 
lines, along with
May  9 21:53:04 pvr kernel: ivtv:  any module options, when mailing the 
ivtv-users mailinglist.
May  9 21:53:04 pvr kernel: ivtv0: Autodetected Hauppauge card (cx23416 based)
May  9 21:53:04 pvr kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9
May  9 21:53:04 pvr kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] 
-> GSI 9 (level, low) -> IRQ 9
May  9 21:53:04 pvr kernel: ivtv0: Unreasonably low latency timer, setting to 
64 (was 32)
May  9 21:53:04 pvr kernel: ieee1394: Host added: ID:BUS[0-00:1023]  
GUID[00e01800005ec313]
May  9 21:53:04 pvr kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 
bytes)
May  9 21:53:04 pvr kernel: ivtv0: Encoder revision: 0x02060039
May  9 21:53:04 pvr kernel: tveeprom 2-0050: Hauppauge model 32032, rev B310, 
serial# 7046004
May  9 21:53:04 pvr kernel: tveeprom 2-0050: tuner model is Philips FI1236 MK2 
(idx 10, type 2)
May  9 21:53:04 pvr kernel: tveeprom 2-0050: TV standards NTSC(M) (eeprom 
0x08)
May  9 21:53:04 pvr kernel: tveeprom 2-0050: audio processor is MSP4448 (idx 
27)
May  9 21:53:04 pvr kernel: tveeprom 2-0050: decoder processor is SAA7115 (idx 
19)
May  9 21:53:04 pvr kernel: tveeprom 2-0050: has no radio, has IR remote
May  9 21:53:04 pvr kernel: ivtv0: Autodetected Hauppauge WinTV PVR-250
May  9 21:53:04 pvr kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver 
#0)
May  9 21:53:04 pvr kernel: saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 
0x42 (ivtv i2c driver #0)
May  9 21:53:04 pvr kernel: msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c 
driver #0)
May  9 21:53:04 pvr kernel: msp3400 2-0040: MSP4448G-A2 supports radio, mode 
is autodetect and autoselect
May  9 21:53:04 pvr kernel: ivtv0: Registered device video0 for encoder MPEG 
(4 MB)
May  9 21:53:04 pvr kernel: ivtv0: Registered device video32 for encoder YUV 
(2 MB)
May  9 21:53:04 pvr kernel: ivtv0: Registered device vbi0 for encoder VBI (1 
MB)
May  9 21:53:04 pvr kernel: ivtv0: Registered device video24 for encoder PCM 
audio (1 MB)
May  9 21:53:04 pvr kernel: tuner 2-0061: type set to 2 (Philips NTSC 
(FI1236,FM1236 and compatibles))
May  9 21:53:04 pvr kernel: ivtv0: Initialized Hauppauge WinTV PVR-250, card 
#0
May  9 21:53:04 pvr kernel: ivtv:  ======================  NEXT CARD  
======================