[mythtv-users] Lossless transcode problem since upgrading to 0.20

[Matthew Carle]

Apologies for the partial message. Here is the complete version:

I have recently upgraded a FC3 system to 0.20 from 0.19 with RPMs. Lossless
MPEG2 transcode no longer seems to work on any file. Here is the output:

[root at mythtv video]# mythtranscode -i test.mpg -o testout.mpg -v all --mpeg2
> transcode.log
[root at mythtv video]# cat transcode.log
2006-10-07 19:47:34.491 Using runtime prefix = /usr
2006-10-07 19:47:34.513 New DB connection, total: 1
2006-10-07 19:47:34.524 Connected to database 'mythconverg' at host:
localhost
2006-10-07 19:47:34.526 Enabling Settings Cache.
2006-10-07 19:47:34.526 Clearing Settings Cache.
2006-10-07 19:47:34.526 Enabled verbose msgs: all
2006-10-07 19:47:34.526 Couldn't deduce channel and start time from test
2006-10-07 19:47:34.527 Transcoding from test.mpg to testout.mpg
2006-10-07 19:47:34.590 Opening test.mpg
2006-10-07 19:47:34.602 Parser not found for Codec Id: 94211 !
2006-10-07 19:47:34.705 Input #0, mpegts, from 'test.mpg':
2006-10-07 19:47:34.705   Duration: N/A, bitrate: N/A
2006-10-07 19:47:34.706   Stream #0.0[0x200]: Video: mpeg2video, yuv420p,
720x576, 15000 kb/s, 25.00 fps(r)
2006-10-07 19:47:34.706   Stream #0.1[0x28a](eng): Audio: mp2, 48000 Hz,
stereo, 256 kb/s
2006-10-07 19:47:34.706   Stream #0.2[0x294](eng): Audio: ac3, 48000 Hz,
stereo, 192 kb/s
2006-10-07 19:47:34.706   Stream #0.3[0x240](eng): Data: 0x0000
2006-10-07 19:47:34.706   Stream #0.4[0x17c0]: Video: mpeg2video, 90000.00
fps(r)
2006-10-07 19:47:34.706 Skipping unsupported codec 2 on stream 3
2006-10-07 19:47:35.087 No more queue slots!

The files are from DVB-T in Australia. Transcode was working fine on almost
all files in 0.19, but I haven't had a single one work since the upgrade.

Any ideas or anything else I can try? Is anyone else experiencing the same
problem?

Thanks, 
Matthew.