[mythtv-users] PVR500 static on both tuners

Marius Schrecker marius at schrecker.org
Wed Jan 11 17:45:49 UTC 2006


> Does anyone have some straightforward instructions to get my PVR500
> working under knoppmyth r5a30 ?
>
> I originally had a PVR-350 but removed it in order to troubleshoot
> this problem. I have installed the IVTV drivers Ver. 0.4.1
> I have copied my firmware to all of the places mentioned in the
> /etc/hotplug/firmware.agent but the fw is never found upon bootup.
>
>
> ivtv:  ==================== START INIT IVTV ===================ivtv:
> version 0.4.1 (tagged release) loading
> ivtv:  Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
> ivtv:  In case of problems please include the debug info between
> ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> ivtv:  any module options, when mailing the ivtv-users mailinglist.
> ivtv0: User specified WinTV PVR 150 card (detected cx23416 based chip)
> ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 21 (level, low) -> IRQ 16
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
> TEA5767 detected.
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
> tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
> type set to 62 (Philips TEA5767HN FM Radio)
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> tveeprom: Second (radio) tuner idx 101
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 23552, rev = D487, serial# = 8742851
> tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 4)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> ivtv0: This is the first unit of a PVR500
> cx25840 1-0044: ivtv driver
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 1-0044: unable to open firmware v4l-cx25840.fw
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 1-001b: ivtv driver
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
> ivtv0: unable to open firmware v4l-cx2341x-enc.fw
> ivtv0: did you put the firmware in the hotplug firmware directory?
> ivtv0 warning: failed loading encoder firmware
> ivtv0 warning: failed loading encoder firmware
> ivtv0 warning: Error loading firmware -3!
> ivtv0: Error -3 initializing firmware.
> ivtv0: Error -12 on initialization
> ivtv: probe of 0000:03:08.0 failed with error -12
> ivtv0: User specified WinTV PVR 150 card (detected cx23416 based chip)
> ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 22 (level, low) -> IRQ 17
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> tveeprom: Second (radio) tuner idx 101
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 23552, rev = D487, serial# = 8742851
> tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 4)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> cx25840 1-0044: ivtv driver
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 1-0044: unable to open firmware v4l-cx25840.fw
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 1-001b: ivtv driver
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> ivtv0: This is the second unit of a PVR500
> ivtv0: Correcting tveeprom data: no radio present on second unit
> ivtv0: unable to open firmware v4l-cx2341x-enc.fw
> ivtv0: did you put the firmware in the hotplug firmware directory?
> ivtv0 warning: failed loading encoder firmware
> ivtv0 warning: Error loading firmware -3!
> ivtv0: Error -3 initializing firmware.
> ivtv0: Error -12 on initialization
> ivtv: probe of 0000:03:09.0 failed with error -12
> ivtv:  ====================  END INIT IVTV  ==================End of line
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
Have you read this ?
http://www.ivtvdriver.org/index.php/Firmware

lots of good stuff on the site too.

Cheers

Marius


More information about the mythtv-users mailing list