[mythtv-users] IR Problem with FC4

Matt Rude mythtv-users at mattrude.com
Tue Jan 10 14:57:23 UTC 2006


So what execting file should I link to? or am I missing a file?
-Matt

Quoting Adam Propeck <adam at propeck.com>:

> I don't know which /dev file you should be linking the /dev/lirc file to
> with the PVR-350, but I would recommend that at least while you test, just
> use (as root or via sudo) 'lircd -n' to see the messages immediately and
> then you don't have to go and look for them. I have a USB-UIRT, and so I
> ended up having to edit the /etc/sysconfig/lircd file to show -h uirt2
> --device=/dev/ttyUSB0   I'd expect that you simply need to edit your file
> appropriately.
>
> On 1/9/06, Matt Rude <mythtv-users at mattrude.com> wrote:
>>
>> I have Mythtv running on FC4 with a PVR-350. Everything is running but the
>> remote control. I have installed lirc & lirc-kmdl via yum along with the
>> reset
>> of the Mythtv suite. I edited my modprobe.conf file and ran these
>> commands.
>>
>> $mkdir /home/mythtv/.mythtv
>> $wget http://wilsonet.com/mythtv/lircrc-haupgrey-g3.txt
>> $mv lircd-haupgrey-g3.conf.txt ~/.mythtv/lircrc
>> $/sbin/depmod -a
>> $/sbin/modprobe lirc_i2c
>> $/sbin/chkconfig lircd on
>> $/sbin/service lircd start
>>
>> Once this is done I can try to run /usr/bin/irw and the program exits. if
>> I look
>> at my messages file I get as below. A list for /dev/lircd shows me.
>>
>> #ll /dev/lir*
>> srw-rw-rw-  1 root root 0 Jan  9 20:31 /dev/lircd
>>
>> I know I need the lirc0 or lirc.
>>
>>
>> What am I missing to make this work?
>> any help would be nice.
>>
>>
>>
>>
>> ### tail /var/log/messages  # Fresh after a reboot
>> Jan  9 20:28:50 mythtv lircd-0.8.0-CVS[2280]: lircd(any) ready
>> Jan  9 20:30:03 mythtv lircd-0.8.0-CVS[2280]: accepted new client on
>> /dev/lircd
>> Jan  9 20:30:03 mythtv lircd-0.8.0-CVS[2280]: could not get file
>> information for
>> /dev/lirc
>> Jan  9 20:30:03 mythtv lircd-0.8.0-CVS[2280]: default_init(): No such file
>> or
>> directory
>> Jan  9 20:30:03 mythtv lircd-0.8.0-CVS[2280]: caught signal
>> Jan  9 20:31:32 mythtv lircd-0.8.0-CVS[2931]: lircd(any) ready
>> Jan  9 20:31:49 mythtv lircd-0.8.0-CVS[2931]: accepted new client on
>> /dev/lircd
>> Jan  9 20:31:49 mythtv lircd-0.8.0-CVS[2931]: could not get file
>> information for
>> /dev/lirc
>> Jan  9 20:31:49 mythtv lircd-0.8.0-CVS[2931]: default_init(): No such file
>> or
>> directory
>> Jan  9 20:31:49 mythtv lircd-0.8.0-CVS[2931]: caught signal
>>
>>
>> ### ll /dev/lirc*
>> srw-rw-rw-  1 root root 0 Jan  9 20:31 /dev/lircd
>>
>>
>> ### cat /etc/modprobe.conf
>> # Enable IF
>> alias char-major-61 lirc_i2c
>> # From Setup
>> alias eth0 e100
>> alias snd-card-0 snd-intel8x0
>> options snd-card-0 index=0
>> options snd-intel8x0 index=0
>> remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
>> /sbin/modprobe -r --ignore-remove snd-intel8x0
>> alias usb-controller uhci-hcd
>> # ivtv modules setup
>> alias char-major-81 ivtv
>> alias char-major-81-0 ivtv
>> alias tveeprom tveeprom-ivtv
>> alias msp3400 msp3400-ivtv
>> install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
>> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
>> lirc_i2c
>> install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 &&
>> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
>> remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
>> /sbin/modprobe -r --ignore-remove snd-emu10k
>>
>>
>>
>>
>>
>>
>>
>> Thanks
>> Matt
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>




More information about the mythtv-users mailing list