[mythtv-users] HD-3000, FC4, PVR-250/500

Chris Lynch lynchseattle at gmail.com
Sat Jan 7 16:56:34 UTC 2006


On 1/6/06, Mike <stuff at dustsmoke.com> wrote:
>
> When you have your channels.conf setup and tune to one, are you getting
> a lock before you try to cat the device? In one console you need to be
> seeing something like this.
> ./azap -r XETV
> tuning to 627000000 Hz
> video pid 0x0000, audio pid 0x0000
> status 00 | signal a28e | snr fb73 | ber 00000000 | unc 00000000 |
> status 1f | signal 04dc | snr fce9 | ber 00000000 | unc 00000000 |
> FE_HAS_LOCK
> status 1f | signal 04dc | snr fd21 | ber 00000000 | unc 00000000 |
> FE_HAS_LOCK
> status 1f | signal 0936 | snr fd19 | ber 00000000 | unc 00000000 |
> FE_HAS_LOCK
> status 1f | signal 0936 | snr fcf9 | ber 00000000 | unc 00000000 |
> FE_HAS_LOCK
>
> Once you see something like that and it locks onto the stream, you
> should be able to cat dvr0 at the same time and get a readable HD file.
> (make sure you don't have mythbackend running and holding onto the dvb
> card like it does) But you have to see the lock otherwise it isn't going
> to give you anything.
>
> Also the only thing I have in my modules.conf. (but /etc/modutiles/ivtv
> in my case with debian sarge and 2.6.14.4 and ivtv 4.1) is
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias char-major-81-1 ivtv
> alias char-major-81-2 ivtv
>
> My system runs a PVR-350 and PVR-500 and a HD-3000 so pretty much the
> same thing you have. (although I use QAM instead of OTA) This post
> helped me when I was first trying to do it with OTA. (and you seem to
> know about the tveeprom.ko from the kernel instead of ivytv)
>
> http://www.avsforum.com/avs-vb/archive/index.php/t-530806.html
>
>
I removed the extra lins from my modprobe and am trying to slim down what's
still going wrong.

Hrm I keep feeling I'm pretty close, but then seem to uncover something
else.  Has anyone been able to compile linuxtv-dvb-apps under FC4 or know of
an RPM source?  I can't run azap or anything yet as I can't get it installed
since GCC4 seems to have a problem wit the sources.

Thanks,

Chris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060107/44f739a6/attachment.htm


More information about the mythtv-users mailing list