[mythtv-users] My pvr-250 thinks it's a radio??

Derek Meek thekazan at gmail.com
Fri Apr 14 13:43:33 UTC 2006


mythtv at gzo.dk wrote:

>I have two pvr-250'ers in my box.
>
>After upgrading to ivtv-0.6.1 on a deb 2.6.16, card0 works fine, but card1 
>only shows static. I have been poking around to see what the problem is, but 
>every switch and parameter i can find, is identical on the cards.
>
>I then ran
>ivtvctl -d /dev/videoX  --log-status
>
>and something very mysterious happens at boot initialization. The output on 
>the cards are this:
>
>   ivtv0: =================  START STATUS CARD #0  =================
>   tveeprom 1-0050: Hauppauge model 32054, rev B148, serial# 7162341
>   tveeprom 1-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
>   tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
>   tveeprom 1-0050: audio processor is MSP4418 (idx 25)
>   tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
>   tveeprom 1-0050: has no radio, has IR remote
>   tuner 1-0061: Tuner mode:      analog TV
>   tuner 1-0061: Frequency:       727.25 MHz
>   tuner 1-0061: Standard:        0x000000ff
>   msp3400 1-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
>   msp3400 1-0040: Audio:    volume 58880
>   msp3400 1-0040: Mode:     AM (for carrier detect)
>   msp3400 1-0040: Standard: 5.5/5.85  B/G NICAM FM (stereo)
>   msp3400 1-0040: ACB:      0x0c00
>   ivtv0: ==================  END STATUS CARD #0  ==================
>   ivtv1: =================  START STATUS CARD #1  =================
>   tveeprom 2-0050: Hauppauge model 32054, rev B148, serial# 7162411
>   tveeprom 2-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
>   tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
>   tveeprom 2-0050: audio processor is MSP4418 (idx 25)
>   tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
>   tveeprom 2-0050: has no radio, has IR remote
>   tuner 2-0061: Tuner mode:      radio
>   tuner 2-0061: Frequency:       0.72 MHz
>   tuner 2-0061: Standard:        0x000000ff
>   tuner 2-0061: Signal strength: 32768
>   tuner 2-0061: Stereo:          yes
>   msp3400 2-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
>   msp3400 2-0040: Audio:    volume 58880
>   msp3400 2-0040: Mode:     AM (for carrier detect)
>   msp3400 2-0040: Standard: could not detect sound standard (mono)
>   msp3400 2-0040: ACB:      0x0c00
>   ivtv1: ==================  END STATUS CARD #1  ==================
>
>
>The second card has "Tuner mode" set to radio?!?!
>
>Anybody know what happens, and how to fix it?
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>  
>
google ivtvctl


More information about the mythtv-users mailing list