[mythtv-users] My pvr-250 thinks it's a radio??

[mythtv at gzo.dk]

I have two pvr-250'ers in my box.

After upgrading to ivtv-0.6.1 on a deb 2.6.16, card0 works fine, but card1 
only shows static. I have been poking around to see what the problem is, but 
every switch and parameter i can find, is identical on the cards.

I then ran
ivtvctl -d /dev/videoX  --log-status

and something very mysterious happens at boot initialization. The output on 
the cards are this:

   ivtv0: =================  START STATUS CARD #0  =================
   tveeprom 1-0050: Hauppauge model 32054, rev B148, serial# 7162341
   tveeprom 1-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
   tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
   tveeprom 1-0050: audio processor is MSP4418 (idx 25)
   tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
   tveeprom 1-0050: has no radio, has IR remote
   tuner 1-0061: Tuner mode:      analog TV
   tuner 1-0061: Frequency:       727.25 MHz
   tuner 1-0061: Standard:        0x000000ff
   msp3400 1-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
   msp3400 1-0040: Audio:    volume 58880
   msp3400 1-0040: Mode:     AM (for carrier detect)
   msp3400 1-0040: Standard: 5.5/5.85  B/G NICAM FM (stereo)
   msp3400 1-0040: ACB:      0x0c00
   ivtv0: ==================  END STATUS CARD #0  ==================
   ivtv1: =================  START STATUS CARD #1  =================
   tveeprom 2-0050: Hauppauge model 32054, rev B148, serial# 7162411
   tveeprom 2-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
   tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
   tveeprom 2-0050: audio processor is MSP4418 (idx 25)
   tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
   tveeprom 2-0050: has no radio, has IR remote
   tuner 2-0061: Tuner mode:      radio
   tuner 2-0061: Frequency:       0.72 MHz
   tuner 2-0061: Standard:        0x000000ff
   tuner 2-0061: Signal strength: 32768
   tuner 2-0061: Stereo:          yes
   msp3400 2-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
   msp3400 2-0040: Audio:    volume 58880
   msp3400 2-0040: Mode:     AM (for carrier detect)
   msp3400 2-0040: Standard: could not detect sound standard (mono)
   msp3400 2-0040: ACB:      0x0c00
   ivtv1: ==================  END STATUS CARD #1  ==================


The second card has "Tuner mode" set to radio?!?!

Anybody know what happens, and how to fix it?