[mythtv-users] ATI Wonder Remote
Folashade Adeyosoye
shardayyy at gmail.com
Sun Nov 13 17:33:35 EST 2005
I am still having the same problem with my ATI wonder Remote. Here is my
setup
* FC4 2.6.13-1.1532_FC4smp
* lircd-0.7.2
* Mythtv 0.18
I have installed and configured to the best of my knowledge. I know the
remote work and receive signals because I was able to test using I believe
irrecord/irxevent.
My modprobe.conf has
# Remote
alias char-major-61 lirc_atiusb
alias lirc_dev lirc_atiusb
My .lircrc is in my mythtv home directory
And lircrc in my .mythtv directory
In my /etc/rc.d/rc.local
echo "Starting lircd"
/usr/local/sbin/lircd
In short things seems to be where they are suppose to be, but when the
system starts up I get error in the /var/log/message
Nov 13 02:45:25 naijatv lircd-0.7.2[2846]: lircd(any) ready
Nov 13 02:45:25 naijatv lircd-0.7.2[2846]: accepted new client on /dev/lircd
Nov 13 02:45:25 naijatv lircd-0.7.2[2846]: could not get file information
for /dev/lirc
Nov 13 02:45:25 naijatv lircd-0.7.2[2846]: default_init(): No such file or
directory
Nov 13 02:45:25 naijatv lircd-0.7.2[2846]: caught signal
Here is a listing of my dev dir:
[root at naijatv dev]# ls -l li*
crw-rw---- 1 root root 61, 0 Nov 13 02:44 lirc0
srw-rw-rw- 1 root root 0 Nov 13 02:45 lircd
prw-r--r-- 1 root root 0 Nov 13 02:45 lircm
Any help would be appreciated.
Thanks
-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Bryan Halter
Sent: Sunday, November 13, 2005 2:45 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] ATI Wonder Remote
Tim Litwiller wrote:
> that last answer is correct.
>
>
>
> On 11/9/05, *David Watkins* <watkinshome at gmail.com
> <mailto:watkinshome at gmail.com>> wrote:
>
> On 09/11/05, Folashade Adeyosoye <shardayyy at gmail.com
> <mailto:shardayyy at gmail.com>> wrote:
> >
> >
> > What am I missing, I tried following
> > ( http://www.litwiller.net/mythtv/remote.html) these
> > instructions but for each button that I press on the remote, it
> repeats 4
> > times. For example if I hit the "3" button I get "3333"
> >
> >
> >
> >
> >
> > What might I be missing?
> users mailing list
> > mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
> The remote will continually generate keycodes. However lircd should
> be able to convert these to single commands.
>
> You could try commenting out the repeat=5 (in lircrc) line for
> buttons
> you don't want to repeat . or maybe change it to repeat=0.
>
> I think repeat=5 means that every 5th command from the remote will get
> sent to the application. For most keys you probably don't want a
> repeat at all. For those that you do (volume, skip etc) experiment
> with different numbers.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
The last answer is correct IF you're using LIRC with your ATI remote and
not the IMO much easier to use kernel driver which allows your remote to
act as a KB and mouse. The problem he's referring to comes in kernels >
2.6.12 when using the default ATI driver. I've looked high and low and
can't find any way to configure the repeat time when loading the
module. If somoene knows this please let me know
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list