[mythtv-users] Re: Hauppauge PVR-250 and PCHDTV-3000 with 2.6.14.2kernel

[James C. Dastrup]

On 13-Nov-05, at 2:28 AM, Ed Tomlinson wrote:

> On Saturday 12 November 2005 20:06, Dustin Nicholas Jenkins wrote:
>> By default, the cx88* drivers load up fine on my Sarge AMD64 install
>> and take input from my PCHDTV-3000 card.  I also have an Hauppauge
>> PVR-250 that requires the ivtv driver.  My problem is that when I
>> build
>> the ivtv driver and replace the msp3400, tveeprom, tuner, and tda9887
>> modules with the ivtv supplied ones, my cx88* drivers no longer load
>> complaining of the following (excerpt from loading cx88-dvb):
>>
>> WARNING: Error inserting cx88xx
>> (/lib/modules/2.6.14.2/kernel/drivers/media/video/cx88/cx88xx.ko):
>> Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting cx8802
>> (/lib/modules/2.6.14.2/kernel/drivers/media/video/cx88/cx8802.ko):
>> Unknown symbol in module, or unknown parameter (see dmesg)
>> FATAL: Error inserting cx88_dvb
>> (/lib/modules/2.6.14.2/kernel/drivers/media/video/cx88/cx88-dvb.ko):
>> Unknown symbol in module, or unknown parameter (see dmesg)
>>
>> I ran depmod -a after moving the old versions of the afore mentioned
>> modules aside, but no luck.  Are the modules built by ivtv so
>> different?  Doesn't depmod take care of this kind of problem?  Or
>> should I forget the cx88* drivers that come with the kernel and
>> install
>> the ivtv and PCHDTV drivers separately?  I've also read that much of
>> the ivtv stuff is being built into the video4linux module, so I'm
>> wondering if I should build that separately too.

I had a similar problem with my PVR-150 and HD-3000. The solution was:
First, I got my HD-3000 running and tested using the built-in kernal drivers
(2.6.13).
Then, I download ivtv 0.3.7 (latest at the time) and did a straightforward
compile and install.
There were a few error but I ignored them and didn't do anything else,
didn't edit modprobe.conf or anything. 
Then, as long as I load ivtv first, cx88-dvb loads just fine.  If I load cx88-dvb
first, then neither card works.
 
Weird, can't explain it, but now both cards work perfectly.
 
 
 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 5485 bytes
Desc: not available
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20051113/2b72d4d2/attachment.bin