[mythtv-users] PVR-150 on Knoppmyth

[Lachlan McIntosh]

Has anyone else got a PVR-150 working on a 2.4 kernel?
 
if  insmod cx25840 I get the following errors:
 
cx25840.o: unresolved symbol open
cx25840.o: unresolved symbol read
cx25840.o: unresolved symbol close
cx25840.o: unresolved symbol offset_in_page

Attached below is what happens when I load IVTV.

Cat /dev/video0 produces no results (except "ivtv: i2c client addr: 0x44
not found!")

I believe this has something to do with the tuner, however I'm only
really interested in composite
Input. I use DVB for off the air, the pvr-150 was only to capture from
the cable set top box.

Any help would be greatly appreciated.

Thanks
Lachlan McIntosh



Mar 25 02:14:39 mythtv kernel: ivtv: ==================== START INIT
IVTV ====================
Mar 25 02:14:39 mythtv kernel: ivtv: version 0.3.2 (l) loading
Mar 25 02:14:39 mythtv kernel: ivtv: Linux version: 2.4.25-chw
Mar 25 02:14:39 mythtv kernel: ivtv: In case of problems please include
the debug info
Mar 25 02:14:39 mythtv kernel: ivtv: between the START INIT IVTV and END
INIT IVTV lines when
Mar 25 02:14:39 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
Mar 25 02:14:39 mythtv kernel: ivtv: Autodetected WinTV PVR 150 card
Mar 25 02:14:39 mythtv kernel: ivtv: Found an iTVC16 based chip
Mar 25 02:14:39 mythtv kernel: ivtv: XXX PCI device: 0x7833 vendor:
0x1002
Mar 25 02:14:39 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Mar 25 02:14:39 mythtv kernel: ivtv: i2c attach [client=(tuner
unset),ok]
Mar 25 02:14:39 mythtv kernel: tveeprom: Hauppauge: model = 26559, rev =
C260, serial# = 7618791
Mar 25 02:14:39 mythtv kernel: tveeprom: tuner = LG S001D MK3 (idx = 60,
type = 58)
Mar 25 02:14:39 mythtv kernel: tveeprom: tuner fmt = PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
Mar 25 02:14:39 mythtv kernel: tveeprom: audio_processor = MSP3410D
(type = 5)
Mar 25 02:14:39 mythtv kernel: ivtv: i2c attach [client=tveeprom[2],ok]
Mar 25 02:14:39 mythtv kernel: ivtv: i2c attach [client=wm8775[2],ok]
Mar 25 02:14:39 mythtv kernel: ivtv: Tuner Type 58, Tuner formats
0x00400e17, Radio: yes, Model 0x008d2590, Revision 0x00000001
Mar 25 02:14:39 mythtv kernel: ivtv: PAL tuner detected
Mar 25 02:14:39 mythtv kernel: ivtv: SECAM tuner detected
Mar 25 02:14:39 mythtv kernel: ivtv: Radio detected
Mar 25 02:14:40 mythtv kernel: ivtv: Encoder revision: 0x02050032
Mar 25 02:14:40 mythtv kernel: ivtv: Encoder Firmware may be buggy, use
version 0x02040011
Mar 25 02:14:40 mythtv kernel: ivtv: Configuring WinTV PVR 150 card with
5 streams
Mar 25 02:14:40 mythtv kernel: ivtv: Registered v4l2 device, streamtype
0 minor 0
Mar 25 02:14:40 mythtv kernel: ivtv: Create DMA stream 0 using 1024
16384 byte buffers  0 kbytes total
Mar 25 02:14:40 mythtv kernel: ivtv: Allocate DMA stream 0 using 1024
16384 byte buffers  16777216 kbytes total
Mar 25 02:14:40 mythtv kernel: ivtv: Registered v4l2 device, streamtype
1 minor 32
Mar 25 02:14:40 mythtv kernel: ivtv: Create DMA stream 1
Mar 25 02:14:40 mythtv kernel: ivtv: Allocate DMA stream 1
Mar 25 02:14:40 mythtv kernel: ivtv: Registered v4l2 device, streamtype
2 minor 224
Mar 25 02:14:40 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte
buffers  0 kbytes total
Mar 25 02:14:40 mythtv kernel: ivtv: Allocate stream 2 using 40 52224
byte buffers  2097152 kbytes total
Mar 25 02:14:40 mythtv kernel: ivtv: Registered v4l2 device, streamtype
3 minor 24
Mar 25 02:14:40 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608
byte buffers  0 kbytes total
Mar 25 02:14:40 mythtv kernel: ivtv: Allocate DMA stream 3 using 455
4608 byte buffers  2097152 kbytes total
Mar 25 02:14:40 mythtv kernel: ivtv: Registered v4l2 device, streamtype
4 minor 64
Mar 25 02:14:40 mythtv kernel: ivtv: Create stream 4
Mar 25 02:14:40 mythtv kernel: ivtv: Allocate stream 4
Mar 25 02:14:40 mythtv kernel: ivtv: ivtv_enc_thread: pid = 1713, itv =
0xe0e45480
Mar 25 02:14:40 mythtv kernel: ivtv: Setting Tuner 4
Mar 25 02:14:40 mythtv kernel: tuner: type set to 4 (NoTuner) by ivtv
i2c driver #0
Mar 25 02:14:40 mythtv kernel: ivtv: i2c client addr: 0x44 not found!
Mar 25 02:14:40 mythtv kernel: ivtv: Switching standard to PAL.
Mar 25 02:14:40 mythtv kernel: ivtv: i2c client addr: 0x44 not found!
Mar 25 02:14:40 mythtv kernel: ivtv: Initialized WinTV PVR 150, card #0
Mar 25 02:14:40 mythtv kernel: ivtv: ====================  END INIT IVTV
====================