[mythtv-users] is my processor to blame? (lockups,
problems with FF and REW)
Andy Long
andymyth at gmail.com
Tue Mar 1 02:46:31 UTC 2005
On Mon, 28 Feb 2005 21:08:20 -0500, Chris Ribe <chrisribe at gmail.com> wrote:
> I run mythbackend on FC3 with a 1 GHz P3 and a pinnacle capture card,
> and the system is generally unstable. I generally run my front end on
> a 400 Mhz PII running KnoppMyth, and that system is more stable.
>
> I know this isn't terribly helpful, but I often run other apps (mostly
> firefox and bittorrent) while mythbackend is running, and I get a lot
> of system crashes.
=
>
> What I'm trying to say is, I don't believe FC3 is a terribly stable OS.
>
=
I'd have to disagree there. My FC3 system is quite stable (though I'm
wrestling w/ some issues, but none are related to FC3 or cause
crashes). Aaron, what codec are you using (it would be in your
recording profile under the LiveTV profile. MPEG-PS, DVD-SPECIAL2,
another one? Have you tried changing those around to see if there's
any difference in behavior?
>
> On Mon, 28 Feb 2005 16:29:27 -0800, Yan-Fa Li <yanfali at best.com> wrote:
> > Aaron Aguilar wrote:
> > > First off thanks so much to this list and to Jared for helping me set
> > > up a working mythtv box. My setup:
> > >
> > > AMD Duron 650Mhz
> > > 384mb RAM
> > > Samsung 160GB HDD
> > > FX5200
> > > Hauppauge PVR250
> > > FC3 2.6.10kernel
> > >
> >
> > Ugh. It could be so many things. Are you running a VIA chipset ? Have
> > you checked the Capacitors on your board lately and are they leaking
> > (Brown Goo) ? Do you have a decent power supply ? Have you checked the
> > RAM lately with Memtest86 ?
> >
> > So many ways your system could be borked. It's possible you are
> > triggering some weird race condition in myth due to a low-end cpu, but
> > apparently people have run myth on PIIs so I doubt it. That's a fairly
> > slow piece of gear these days. $99 bucks gets you a Sempron 2200 with
> > motherboard if you shop around.
> >
> > I have myth running on a P3 933 quite well as a front end. Last time I
> > had problems with the IVTV and a system it was because I had bad
> > capacitors. Pulled it all and replaced it with a nforce2/sempron.
> > Since then I fixed the bad caps on the old board and it runs reliably as
> > a windows box. Haven't tested mythtv on it again.
> >
> > Good luck,
> >
> > Yan
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
More information about the mythtv-users
mailing list