[mythtv-users] DirectTV D10 Receiver - channel problems
sharris at synthys.com
Wed Jun 1 00:21:15 UTC 2005
> -----Original Message-----
> From: mythtv-users-bounces at mythtv.org
> [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of djg at pdp8.net
> Sent: Tuesday, May 31, 2005 9:44 AM
> To: mythtv-users at mythtv.org
> Subject: RE: [mythtv-users] DirectTV D10 Receiver - channel problems
> What is the full number of your box? My script at
> can change channels by sending remote keys. The D10-200 box
> I have will lockup sometimes with the normal channel change
> command so I added support to change channel by sending the
> remote keys instead of the channel change command.
> Try the script with the channel change command string
> directv.pl channel_change_type key setup_channel
> for manual testing add the channel number at the end.
> If you have a d10-200 box you will need box_type d10-200 also
> before the setup channel.
> You can also try without the channel_change_type key but I
> expect it will work the same as the other scripts.
> I only have a D10-200 so haven't tested on other boxes so
> would be interested in if it does work. I attempted to not
> break support for other boxes as I added the additional stuff.
Interesting enough this script works but the satcontrol-0.02 only works
for channels greater than 102 (I contacted the author).
./directv.pl box_type D10-200 port /dev/ttyS0 6
Changes the channel to 6 on the guide but then kills the process leaving you
on the same channel
./directv.pl channel_change_type key box_type D10-200 port /dev/ttyS0
Produces an error for channels < 102
./directv.pl port /dev/ttyS0 6
Error excessive retries
./directv.pl port /dev/ttyS0 102
More information about the mythtv-users