[mythtv-users] How to set channel PIDs
Brett Stevens
brett.stevens at hubbub.com.au
Fri Jul 15 08:50:36 EDT 2005
Hi sorry if this has been asked before but Im at the end of my whits now.
Ive been fiddling around for about 3 weeks trying to get myth working.
Firstly I got a semi supported card (dvico fusion plus).... one week later
got that working.
sorta. using tzap and xine (No sound)
Anyway figured id go on with myth and cover the sound problem later. Ive now
spent 2 weeks on trying to configure tv. Got just about everything else
working (dvd's ripping weather rss and browsing) still no tv.
Ive read about a thousand howto's and they mostly talk about entering the
video and audio pids.
Unless Im completely stupid (quite likely these days) I just cant find
anywhere to add them
now getting desperate as the wife wants to know where the money and time as
gone.
Ive been using this guide to configure as this seems to be a little more
accurate for Australia
http://www.users.on.net/~jani/dvico-mythtv-11.html
thanks In advance
Brett Stevens
OS: Suse 9.3
kernel: patched 2.6.11.2
sound alsa
video: adequate (this will be a master backend)
myth version: mythtv-0.18.1-12 via apt-get
lsmod ...
snd_pcm_oss 54176 0
snd_mixer_oss 19584 1 snd_pcm_oss
snd_via82xx 29888 0
snd_ac97_codec 73720 1 snd_via82xx
snd_pcm 106760 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 34564 1 snd_pcm
snd_mpu401_uart 10368 1 snd_via82xx
snd_rawmidi 30240 1 snd_mpu401_uart
snd_seq_device 9484 1 snd_rawmidi
snd 60772 9
snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_m
pu401_uart,snd_rawmidi,snd_seq_device
usbserial 30568 0
button 6928 0
battery 9732 0
ac 5124 0
floppy 65584 0
nvram 13192 0
md5 4608 1
ipv6 271424 12
joydev 10304 0
st 39580 0
sr_mod 19876 0
sg 39200 0
cx88_dvb 6660 0
cx8802 12164 1 cx88_dvb
mt352 6404 1 cx88_dvb
cx88xx 49044 2 cx88_dvb,cx8802
i2c_algo_bit 9352 1 cx88xx
snd_page_alloc 10500 2 snd_via82xx,snd_pcm
btcx_risc 5256 2 cx8802,cx88xx
gameport 5504 1 snd_via82xx
videodev 10240 1 cx88xx
video_buf_dvb 7300 1 cx88_dvb
tg3 100868 0
i2c_viapro 8336 0
soundcore 11232 1 snd
ehci_hcd 40328 0
uhci_hcd 34576 0
video_buf 24068 4 cx88_dvb,cx8802,cx88xx,video_buf_dvb
video1394 20812 0
parport_pc 29764 1
ohci1394 39300 1 video1394
lp 13064 0
parport 42184 2 parport_pc,lp
raw1394 42604 0
ieee1394 315476 3 video1394,ohci1394,raw1394
dm_mod 64148 0
reiserfs 271988 1
aic7xxx 184152 0
sata_promise 10884 0
libata 50052 1 sata_promise
sd_mod 19712 0
scsi_mod 144840 7
st,sr_mod,sg,aic7xxx,sata_promise,libata,sd_mod
dmesg
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fffc000 (usable)
BIOS-e820: 000000007fffc000 - 000000007ffff000 (ACPI data)
BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524284
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 294908 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6060
ACPI: RSDT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc000
ACPI: FADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc0b2
ACPI: BOOT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc030
ACPI: MADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc058
ACPI: DSDT (v001 ASUS A7V8X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=0x317 selinux=0 splash=silent
resume=/dev/hda1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2083.203 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071776k/2097136k available (2614k kernel code, 24404k reserved,
686k data, 188k init, 1179632k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4128.76 BogoMIPS (lpj=2064384)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e00)
checking if image is initramfs... it is
Freeing initrd memory: 3247k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1720, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas at hp.com
** so I can fix the driver.
pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
pnp: 00:0d: ioport range 0x290-0x291 has been reserved
pnp: 00:0d: ioport range 0x370-0x372 has been reserved
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1121462458.504:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xee000000, mapped to 0xf8880000, using 3072k, total
4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0336
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 1919M
agpgart: AGP aperture is 128M @ 0xf0000000
[drm] Initialized drm 1.0.0 20040925
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y200P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 398294975 sectors (203927 MB)
native capacity is 398297088 sectors (203928 MB)
hda: Host Protected Area disabled.
hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 128Kbytes
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 PCI1 USB0 USB1 USB2 SU20 MC97 LAN
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 188k freed
SCSI subsystem initialized
libata version 1.10 loaded.
sata_promise version 1.01
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
ata1: SATA max UDMA/133 cmd 0xF887C200 ctl 0xF887C238 bmdma 0x0 irq 10
ata2: SATA max UDMA/133 cmd 0xF887C280 ctl 0xF887C2B8 bmdma 0x0 irq 10
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023
88:207f
ata1: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023
88:207f
ata2: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda:
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
sdb:
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi2:A:0): 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Vendor: ARCHIVE Model: Python 06408-XXX Rev: 8071
Type: Sequential-Access ANSI SCSI revision: 03
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
ieee1394: raw1394: /dev/raw1394 device initialized
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
PCI: Enabling device 0000:00:07.0 (0094 -> 0097)
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[eb800000-eb8007ff]
Max Packet=[2048]
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
video1394: Installed video1394 module
lp0: using parport0 (interrupt-driven).
lp0: console ready
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800000b1437]
Adding 4200956k swap on /dev/hda1. Priority:42 extents:1
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
kobject_register failed for dvb_core (-17)
[<c0203811>] kobject_register+0x51/0x60
[<c0142667>] mod_sysfs_setup+0x57/0xc0
[<c0143a6a>] load_module+0x86a/0xa40
[<c0143c97>] sys_init_module+0x57/0x320
[<c0178981>] sys_read+0x41/0x70
[<c0103a2d>] sysenter_past_esp+0x52/0x75
uhci_hcd 0000:00:10.0: irq 11, io base 0xb000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 11, io base 0xa800
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 11, io base 0xa400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 11, pci mem 0xe6800000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
tg3.c:v3.23 (February 15, 2005)
PCI: Enabling device 0000:00:09.0 (0014 -> 0016)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit)
10/100/1000BaseT Ethernet 00:e0:18:b9:18:5e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
Linux video capture interface: v1.00
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
cx2388x dvb driver version 0.0.4 loaded
cx88[0]: subsystem: 18ac:db11, board: DVICO FusionHDTV DVB-T Plus
[card=21,insmod option]
PCI: Enabling device 0000:00:0b.2 (0014 -> 0016)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0b.2[A] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/2: found at 0000:00:0b.2, rev: 5, irq: 10, latency: 32, mmio:
0xe7000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (DVICO FusionHDTV DVB-T Plus)...
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 1
st: Version 20041025, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi2, channel 0, id 0, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA
1048575
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
mtrr: 0xee000000,0x2000000 overlaps existing 0xee000000,0x400000
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03fe680(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device dfedd800(sit0)
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
ACPI: Power Button (FF) [PWRF]
powernow-k8: Processor cpuid 6a0 not supported
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
eth0: no IPv6 routers present
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
More information about the mythtv-users
mailing list