[mythtv-users] please help... still getting b&w with PVR-150

[andrew matthews]

woah woah woah.... you can't use the pvr 250-350 firmware with the 150...

http://ivtv.writeme.ch/tiki-index.php?page=Drivers+and+Firmware

that will tell you about the firmware and the stuff you need for the 150.

The black and white issue i have seen with the 3x series ivtv driver. I 
suggest you downgrade to
http://www.ivtv.tv/releases/ivtv-0.2/


On 7/14/05, Howard Cokl <hojoloco at yahoo.com> wrote:
> 
> 
> 
> --- Ricardo Kleemann <ricardo at americasnet.com> wrote:
> 
> > Hi all,
> >
> > I've slowly made progress on the configuration of my
> > PVR-150. I have it
> > capturing on the S-Video input, and I can play it
> > fine with Watch Live TV.
> > However, I get no color. Here's my dmesg output for
> > the card. Any help is
> > greatly appreciated!
> >
> > I'm using the firmware HcwMakoA.ROM that came with
> > the card's CD. The text
> > below says to use another firmware version... where
> > would I find that?
> >
> > Thank you.
> > Ricardo
> >
> > ivtv: ==================== START INIT IVTV
> > ====================
> > ivtv: version 0.3.6 (w) loading
> > ivtv: Linux version: 2.6.11-1.1369_FC4smp SMP 686
> > REGPARM 4KSTACKS gcc-4.0
> > ivtv: In case of problems please include the debug
> > info
> > ivtv: between the START INIT IVTV and END INIT IVTV
> > lines when
> > ivtv: mailing the ivtv-devel mailinglist.
> > ivtv: Unknown card: vendor/device: 4444/0016,
> > subsystem vendor/device:
> > 0000/8801
> > ivtv: Defaulting to WinTV PVR 250 card
> > ivtv: Please mail the vendor/device and subsystem
> > vendor/device IDs and what
> > kind of
> > ivtv: card you have to the ivtv-devel mailinglist:
> > http://sourceforge.net/projects/ivtv
> > ivtv: Prefix your subject line with [UNKNOWN CARD].
> > ivtv: Found an iTVC16 based chip
> > ivtv: XXX PCI device: 0x7190 vendor: 0x8086
> > ivtv: i2c attach [client=tveeprom,ok]
> > ivtv: i2c attach [client=(tuner unset),ok]
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > saa7115: starting probe for adapter ivtv i2c driver
> > #0 (0x10005)
> > msp3400: error while reading chip version
> > tveeprom: Hauppauge: model = 26552, rev = B268,
> > serial# = 7865176
> > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type
> > = 47)
> > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
> > 0x00001000)
> > tveeprom: audio_processor = MSP3410D (type = 5)
> > ivtv: Tuner Type 47, Tuner formats 0x00001000,
> > Radio: yes, Model 0x00892598,
> > Revision 0xc031d677
> > ivtv: NTSC tuner detected
> > ivtv: Radio detected
> > ivtv: Encoder revision: 0x02050032
> > ivtv: Encoder Firmware may be buggy, use version
> > 0x02040011
> > ivtv: Configuring WinTV PVR 250 card with 5 streams
> > ivtv: Registered v4l2 device for encoder MPEG minor
> > 0
> > ivtv: Create DMA encoder MPEG stream: 0 x 32768
> > buffers (0KB total)
> > ivtv: Registered v4l2 device for encoder YUV minor
> > 32
> > ivtv: Create DMA encoder YUV stream: 0 x 10800
> > buffers (0KB total)
> > ivtv: Registered v4l2 device for encoder VBI minor
> > 224
> > ivtv: Create DMA encoder VBI stream: 0 x 8736
> > buffers (0KB total)
> > ivtv: Registered v4l2 device for encoder PCM audio
> > minor 24
> > ivtv: Create DMA encoder PCM audio stream: 0 x 4608
> > buffers (0KB total)
> > ivtv: Registered v4l2 device for encoder radio minor
> > 64
> > ivtv: Create encoder radio stream
> > ivtv: Setting Tuner 47
> > tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
> > ivtv: i2c client addr: 0x21 not found for command
> > 0x40046403!
> > ivtv: i2c client addr: 0x21 not found for command
> > 0x40046404!
> > ivtv: Setting audio matrix to input 3, output 1
> > ivtv: i2c client addr: 0x40 not found for command
> > 0x40086d11!
> > ivtv: i2c client addr: 0x40 not found for command
> > 0x80287610!
> > ivtv: i2c client addr: 0x40 not found for command
> > 0x40287611!
> > ivtv: Switching standard to NTSC.
> > ivtv: i2c client addr: 0x40 not found for command
> > 0x40307603!
> > ivtv: i2c client addr: 0x21 not found for command
> > 0x40046403!
> > ivtv: Initialized WinTV PVR 250, card #0
> > ivtv: ==================== END INIT IVTV
> > ====================
> > ivtv: ivtv_enc_thread: pid = 3786, itv = 0xe8ba7120
> > ivtv: ivtv_enc_vbi_thread: pid = 3787, itv =
> > 0xe8ba7120
> >
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> >
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> 
> Current Recommended Firmware:
> 
> ftp://ftp.shspvr.com/download/wintv-pvr_250-350/win9x-2k-xp_mpeg_wdm_drv/pvr48wdm_1.8.22037.exe
> 
> 
> Howard
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20050714/75972fb1/attachment.htm