[mythtv-users] Remote Control Setup

Jarod Wilson jcw at wilsonet.com
Sun Sep 19 22:35:42 EDT 2004

On Sunday 19 September 2004 13:06, Chris LaForce wrote:
> > > Hello,
> > >   The kernel-module that I am loading up is
> > > kernel-module-lirc-2.6.8-1.521.
> >
> > Not the rpm, the actual kernel module, as defined in modprobe.conf. For
> > example, I'm loading lirc_mceusb for my MCE USB IR receiver and lirc_i2c
> > for my Hauppauge IR receiver.
> >
> > > I don't see a directory
> > > /usr/share/doc/ivtv-* for PVR-x50's lircd.conf file as you stated
> > > above.  Any more suggestions would be great.
> > > Thanks for your help,
> >
> > D'oh. Of course not, my mistake. That would require that you had
> > installed ivtv, which you haven't, since it isn't an ivtv card. Grab the
> > ivtv tarball and you'll be able to find it in there.
> Jarod,
>    I got the tarball off of sourceforge and copied over the file and
> restarted lircd and ran irw and I still get no output from the remote.
> Is there anything left to check.

Only other things that come to mind are 1) trying the remote under Windows as 
someone else suggested to double-check that you don't have faulty hardware 
and 2) are you positive lirc_gpio is the correct lirc module for that card? 
You might give lirc_i2c a shot...

Jarod C. Wilson, RHCE
jcw at wilsonet.com

Got a question? Read this first...
MythTV, Fedora Core & ATrpms documentation:
MythTV Searchable Mailing List Archive
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: signature
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20040919/86bf1628/attachment.pgp

More information about the mythtv-users mailing list