[mythtv-users] Capture Problems (Leadtek Winfast 200XP Deluxe)

[nate s]

I believe I have the same card as you.  

For bttv vs cx88, it depends on what card you have; the delux is bttv,
the expert is cx88.

Does video work in tvtime or xawtv?

-Nate


On Fri, 15 Oct 2004 15:54:03 -0400, Brad Bonkoski
<bbonkosk at tampabay.rr.com> wrote:
>  
> I have read some general discussion about using the bttv driver versus the
> ct8xx driver.  Currently I have had the best 'apparent' luck with the bttv
> driver.  Here is my dmesg output: 
> server root # dmesg  | grep bttv
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 9, latency: 32, mmio: 0xde000000
> bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is
> 107d:6606
> bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init]
> bttv0: using tuner=2
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv0: add subdevice "remote0"
> bttv0: PLL can sleep, using XTAL (28636363). 
>   
> Does this look like the device driver is being properly loaded, and the
> device properly registered? 
> When I run myth and try to watch TV, I just get a green screen and nothing
> else. 
> Any ideas on where to start. 
>   
> Thanks 
> -brad 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>