[mythtv-users] atrpms lircd 0.7.0pre8 appears to break PVR-350 lirc interface

Ashley Bostock abostock at gmail.com
Fri Oct 15 06:31:23 UTC 2004


On a related note has any one been having problems with their
hauppauge remotes and navigating the epg?  I cant move left or right,
but left and right work in all other myth menus.

http://www.mythtv.org/bugs/show_bug.cgi?id=129


On Thu, 14 Oct 2004 18:38:34 -0700, Michael Fenston
<fenston-myth at san.rr.com> wrote:
> I ended up downgrading to 0.7.0pre7 using synaptic (pretty easy to do),
> rebooted and all was good ...
> 
> -Mike
> 
> 
> 
> Darren Boyd wrote:
> 
> >
> > Do a:
> >
> > # lsmod | grep lirc
> >
> > You should see something like this:
> >
> > lirc_i2c                7172  1
> > lirc_dev               10636  1 lirc_i2c
> > i2c_core               17345  8
> > bttv,lirc_i2c,msp3400,saa7127,saa7115,tuner,tveeprom,i2c_algo_bit
> >
> > It is possible you are missing one of these, like lirc_i2c or
> > lirc_dev.  If so, load it:
> >
> > # modprobe lirc_i2c
> >
> > Then restart your frontend and try again.
> >
> > I did the exact same thing you did and also ended up with a
> > non-functioning remote.  After some fiddling I stumbled across the
> > fact that one of the above modules was not loaded.  Unfortunately, I
> > don't know why it doesn't get loaded, or how to fix the problem better
> > than simply loading it manually.
> >
> > Darren
> >
> >
> > Michael Fenston wrote:
> >
> >> Hi ...
> >>
> >> I just did an apt-get update && apt-get dist-upgrade with
> >> /etc/apt/sources.list set to at-stable, installed lircd 0.7.0pre8
> >> (came with the other updates), noticed my remote was no longer
> >> working in mythtv GUI; I then rebooted and my grey Hauppauge remote
> >> is no longer working with my PVR-350 card in the mythtv GUI still.  I
> >> just signed up to the atrmps-users list so apologies if this is
> >> already on another thread.  Any ideas?
> >>
> >> Thanks,
> >>
> >> -Mike
> >>
> >> cat /var/log/messages | grep irc
> >>
> >> Oct 14 07:51:29 localhost lircd 0.7.0pre7[2276]: lircd(any) ready
> >> Oct 14 07:51:29 localhost lircd: lircd startup succeeded
> >> Oct 14 07:51:59 localhost lircd 0.7.0pre7[2276]: accepted new client
> >> on /dev/lircd
> >> Oct 14 07:51:59 localhost kernel: lirc_dev: IR Remote Control driver
> >> registered, at major 61
> >> Oct 14 07:51:59 localhost kernel: lirc_i2c: chip found @ 0x18
> >> (Hauppauge IR)
> >> Oct 14 07:51:59 localhost kernel: lirc_dev:
> >> lirc_register_plugin:sample_rate: 10
> >> Oct 14 08:09:34 localhost lircd 0.7.0pre7[2276]: caught signal
> >> Oct 14 08:09:34 localhost lircd: lircd shutdown succeeded
> >> Oct 14 08:09:34 localhost lircd 0.7.0pre8[3128]: lircd(any) ready
> >> Oct 14 08:09:34 localhost lircd: lircd startup succeeded
> >> Oct 14 08:15:57 localhost lircd 0.7.0pre8[3128]: caught signal
> >> Oct 14 08:15:57 localhost lircd: lircd shutdown succeeded
> >> Oct 14 08:17:11 localhost lircd: lircd startup succeeded
> >> Oct 14 08:17:11 localhost lircd 0.7.0pre8[2275]: lircd(any) ready
> >> Oct 14 08:17:41 localhost lircd 0.7.0pre8[2275]: accepted new client
> >> on /dev/lircd
> >> Oct 14 08:17:41 localhost kernel: lirc_dev: IR Remote Control driver
> >> registered, at major 61
> >> Oct 14 08:17:41 localhost lircd 0.7.0pre8[2275]: could not open
> >> /dev/lirc
> >> Oct 14 08:17:41 localhost lircd 0.7.0pre8[2275]: default_init(): No
> >> such device
> >> Oct 14 08:17:41 localhost lircd 0.7.0pre8[2275]: caught signal
> >> [root at localhost root]#
> >> _______________________________________________
> >> mythtv-users mailing list
> >> mythtv-users at mythtv.org
> >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >>
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>


More information about the mythtv-users mailing list