[mythtv-users] Questions about EPIA M10k and PVR350

[Darryl Okahata]

Stephen Longhurst <steve at longsteve.com> wrote:

> > 2. I get good sound through the s-video ==> SCART cable that came with
> > my pvr350, I can't seem to get anything but noise if i loop back the
> > TV-out to audio to the line-in of my epia soundcard. Any ideas?
>
> If you're using the SCART cable that came with the PVR-350, the 3.5mm
> flying lead that also comes out of the same lead isn't the audio that
> goes out to the decoder.  I think it's actually the the audio of what
> the encoder is actually receiving at that point, which isn't a lot of
> good if you're time shifting.

     No, the audio is from the decoder.  I use this setup, and the audio
is always that of whatever I'm watching, time-shifted or not.

     The OP is probably running into the VIA 48KHz sampling issue, which
has already been discussed here (unfortunately, I have no answers for
it, and I have the same problem).

-- 
	Darryl Okahata
	darrylo at soco.agilent.com

DISCLAIMER: this message is the author's personal opinion and does not
constitute the support, opinion, or policy of Agilent Technologies, or
of the little green men that have been following him all day.