[mythtv-users] Static during test capture -
PVR350/Pundit/FC1/Jarods Guide
Raymond T. Gaida
rtgaida at comcast.net
Fri Jan 23 11:40:39 EST 2004
One thing you can try...
Open up 2 console windows in X. In one window run ptune-ui.pl:
# /usr/lib.ivtv/ptune-ui.pl
This should open up the graphical tuner program. Make sure you use the
correct input type. Mine is us-cable-hrc.
In the other console window try this:
# mplayer /dev/video0
or whatever you set as your video device. You should get an mplayer window
with something intelligible. You can then use the ptune program to change
channels in real time. If you do get a viewable picture, then you know your
card is set up properly.
Ray
-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org]On Behalf Of Damon
Sent: Friday, January 23, 2004 10:02 AM
To: mythtv-users at mythtv.org
Subject: [mythtv-users] Static during test capture -
PVR350/Pundit/FC1/Jarods Guide
Hello All,
I hope someone can help, I have been banging my head against the wall with
this problem and I would appreciate some guidance
I am using the following.
Hardware:
Asus Pundit Case/Mobo
Pentium Celeron 2.4mhz
512MB DDR 333
Maxtor 200GB HDD Ata133
Hauppauge PVR 350 Tv Card
Software Setup:
- Using Jarod's guide in every detail to setup Myth 0.13 using FC1
- Kernel 2.4.22-1.2140.nptl_30.rhfc1.at
Problem:
When I get to the portion of Jarod's setup that has you do a test capture
(cat /dev/video0 > /tmp/test_capture.mpg), my resulting output is static for
both picture and audio, with faint outlines of the channel and some barely
recognizable audio. I continued on and setup myth. When running myth I can
only muster a black screen.
I tried the other -p settings (0to5) and had only luck (luck being static)
with 4. Can anyone advise what I may be doing wrong? Do I need different
Hauppauge drivers? Bad Config?
My wiring setup is basically taking the cable from the wall and plugging
it directly to the Coax in on the Hauppauge card.
Please help if you can. I will post below the output of one of the
troubleshooting commands I see requested from people asking questions on the
list. If you need any more output listings let me know...
Question 2:
Using this setup (Cable to PVR 350 Coax in), should I be selecting Tuner0
in the myth setup (As opposed to compositeX or svideoX)
/usr/lib/ivtv/test_ioctl -a | more
ioctl: IVTV_IOC_G_CODEC
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 16000000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 0
dnr_type : 0
framerate : 0
framespergop: 15
gop_closure : 0
pulldown : 0
stream_type : 0
ioctl: VIDIOC_G_FMT
Type : Video Capture
Width : 720
Height : 480
ioctl: VIDIOC_QUERYCAP
Driver name : ivtv
Card type : Vanilla iTVC15 card
Bus info : 0
Driver version: 265
Capabilities : 0x01030003
ioctl: VIDIOC_ENUMINPUT
Name : Composite 0
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 3
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Tuner 0
Type : 0x00000001
Audioset: 0x00000000
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 4
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 0
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 3
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
ioctl: VIDIOC_G_INPUT
Input = 4
ioctl: VIDIOC_G_FREQUENCY
Frequency = 0
ioctl: VIDIOC_ENUMSTD
ID : 0x 3000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
ID : 0x FF
Name : PAL
Frame period: 1/25
Frame lines : 625
ID : 0x 7F0000
Name : SECAM
Frame period: 1/25
Frame lines : 625
ioctl: VIDIOC_G_STD
Standard = 0x00003000
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 59343
Mute = 0
Thanks in advance for your time,
Damon.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20040123/cf20f274/attachment.htm
More information about the mythtv-users
mailing list