[mythtv-users] X through PVR350 probs

Piers Kittel mythtv at biased.org
Mon Dec 27 18:35:34 UTC 2004


Hello again,

Have added "std=2" onto the modules.conf file (already have an 
ivtv_std=2 there though) and no difference.

Here's the messages from dmesg (full dmesg is at www.biased.org/misc/dmesg)

=================================
i2c-core.o: driver saa7127 registered.
i2c-core.o: driver saa7115 registered.
i2c-core.o: driver i2c msp3400 driver registered.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.2 (a) loading
ivtv: Linux version: 2.4.28-pk-20041225-2
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3123 vendor: 0x1106
tuner: chip found @ 0xc2
tuner(bttv): type forced to 1 (Philips PAL_I (FI1246 and compatibles)) 
[insmod]
ivtv: i2c attach [client=Philips PAL_I (FI1246 and compa,ok]
i2c-core.o: client [Philips PAL_I (FI1246 and compa] registered to 
adapter [ivtv i2c driver #0](pos. 0).
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
i2c-core.o: client [saa7127[0]] registered to adapter [ivtv i2c driver 
#0](pos. 1).
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver 
#0](pos. 2).
saa7115: status: (1E) 0x48, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, 
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Dec 27 2004 10:25:22
ivtv: i2c attach [client=MSP3418W-A2,ok]
i2c-core.o: client [MSP3418W-A2] registered to adapter [ivtv i2c driver 
#0](pos. 3).
i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
i2c-core.o: driver tveeprom registered.
tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7244636
tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
i2c-core.o: client [tveeprom[0]] registered to adapter [ivtv i2c driver 
#0](pos. 4).
ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model 
0x00a93494, Revision 0x00000001
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8 using 6 103680 byte buffers  622080 kbytes total
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 9 using 32 65536 byte buffers  2097152 kbytes total
ivtv: ivtv_enc_thread: pid = 1109, itv = 0xde9ab740
ivtv: ivtv_dec_thread: pid = 1111, itv = 0xde9ab740
ivtv: Setting Tuner 5
tuner: type already set (1)
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV  ====================
i2c-core.o: client [saa7115[0]] unregistered.
i2c-core.o: driver unregistered: saa7115
saa7127: video encoder driver unloaded
i2c-core.o: client [saa7127[0]] unregistered.
i2c-core.o: driver unregistered: saa7127
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: Setting audio matrix to input 1, output 1
ivtv: i2c client addr: 0x21 not found!
saa7127: video encoder driver version V 0.3 loaded
i2c-core.o: driver saa7127 registered.
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
i2c-core.o: client [saa7127[0]] registered to adapter [ivtv i2c driver 
#0](pos. 1).
i2c-core.o: driver saa7115 registered.
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver 
#0](pos. 2).
saa7115: status: (1E) 0x48, (1F) 0xc0
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 
1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 576]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xdd510000, mapped to 0xdf75e000, size 1620k
ivtv-osd: mode is 720x576x32, linelength=2880
Console: switching to colour frame buffer device 90x36
ivtv-osd: fb0: iTVC15 TV out frame buffer device
=================================

Here is what is in my modules.conf file relating to ivtv:

=================================
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias /dev/v4l ivtv
options saa7127 enable_output=1 output_select=0 pal=1
options ivtv ivtv_debug=1 ivtv_pal=1 tuner=5 ivtv_std=2 std=2
options tuner pal=1
options tuner type=1
options msp3400 once=1 simple=1
add below ivtv msp3400 saa7115 saa7127 tuner
add above ivtv ivtv-fb
post-install ivtv /usr/local/bin/test_ioctl -d /dev/video0 -u 0xff
=================================

Thanks again

Cheers - Piers

John Harvey wrote:
> I'm assuming that you are in PAL world?
> If so I would guess that the driver isn't running properly in PAL.
> Either add std=2 (I think) to ivtv options or if that doesn't work post a
> link to your messages file and I'll take a look through it.
> 
> John


More information about the mythtv-users mailing list