[mythtv-users] Re: /dev/lirc working, lircd/irw not?
Joakim Kolsjö
trejje at gmail.com
Sun Dec 5 14:58:47 UTC 2004
thank you! that config worked :)
On Sun, 5 Dec 2004 13:18:45 +0100, Ryszard <ryszard99 at gmail.com> wrote:
> there is a "new" hauppauge grey remote and an old one. i had almost
> the same problem, ie an strace on the lircd daemon showed it seeing
> the button presses, but irw wouldnt. i changed my lircd file and it
> "just worked".
>
> # Please make this file available to others
> # by sending it to <lirc at bartelmus.de>
> #
> # this config file was automatically generated
> # using lirc-0.7.0(hauppauge) on Tue Nov 30 00:38:32 2004
> #
> # contributed by
> #
> # brand: lirc.conf
> # model no. of remote control:
> # devices being controlled by this remote:
> #
>
> begin remote
>
> name grayHauppauge
> bits 13
> flags RC5
> eps 30
> aeps 100
>
> one 0 0
> zero 0 0
> gap 200966
> repeat_bit 2
>
> begin codes
> Power 0x00000000000017BD
> Go 0x0000000000001FBB
> TV 0x000000000000179C
> Videos 0x0000000000001F98
> Music 0x0000000000001799
> Pictures 0x0000000000001F9A
> Guide 0x000000000000179B
> Radio 0x0000000000001F8C
> UP 0x0000000000001794
> LEFT 0x0000000000001F96
> RIGHT 0x0000000000001797
> DOWN 0x0000000000001F95
> OK 0x00000000000017A5
> Back-Exit 0x0000000000001F9F
> Menu 0x000000000000178D
> Prev-Channel 0x0000000000001F92
> Mute 0x000000000000178F
> Volume-UP 0x0000000000001F90
> Volume-DOWN 0x0000000000001791
> Channel-UP 0x0000000000001FA0
> Channel-DOWN 0x00000000000017A1
> Record 0x0000000000001FB7
> Stop 0x00000000000017B6
> Rewind 0x0000000000001FB2
> Forward 0x00000000000017B4
> Play 0x0000000000001FB5
> Previous 0x00000000000017A4
> Next 0x0000000000001F9E
> Pause 0x00000000000017B0
> 1 0x0000000000001F81
> 2 0x0000000000001782
> 3 0x0000000000001F83
> 4 0x0000000000001784
> 5 0x0000000000001F85
> 6 0x0000000000001786
> 7 0x0000000000001F87
> 8 0x0000000000001788
> 9 0x0000000000001F89
> 0 0x0000000000001780
> star 0x0000000000001F8A
> hash 0x000000000000178E
> red 0x0000000000001F8B
> green 0x00000000000017AE
> yellow 0x0000000000001FB8
> blue 0x00000000000017A9
> end codes
>
> end remote
>
>
>
>
> On Sat, 04 Dec 2004 23:09:11 -0400, Kyle Kelly <kyle at kylekelly.com> wrote:
> > Joakim Kolsjö wrote:
> >
> >
> >
> > >>My tv-out card is an hauppauge wintv pvr 250 and i use the included
> > >>remote control.
> > >>
> > >>
> > >
> > >"tv-out" hehe... gotta double check my writing sometimes :P
> > >
> > >
> > >------------------------------------------------------------------------
> > >
> > >_______________________________________________
> > >mythtv-users mailing list
> > >mythtv-users at mythtv.org
> > >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> > >
> > Have you used irrecord to setup your lircd.conf?
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list