[mythtv-users] Re: /dev/lirc working, lircd/irw not?
Ryszard
ryszard99 at gmail.com
Sun Dec 5 12:18:45 UTC 2004
there is a "new" hauppauge grey remote and an old one. i had almost
the same problem, ie an strace on the lircd daemon showed it seeing
the button presses, but irw wouldnt. i changed my lircd file and it
"just worked".
# Please make this file available to others
# by sending it to <lirc at bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.7.0(hauppauge) on Tue Nov 30 00:38:32 2004
#
# contributed by
#
# brand: lirc.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name grayHauppauge
bits 13
flags RC5
eps 30
aeps 100
one 0 0
zero 0 0
gap 200966
repeat_bit 2
begin codes
Power 0x00000000000017BD
Go 0x0000000000001FBB
TV 0x000000000000179C
Videos 0x0000000000001F98
Music 0x0000000000001799
Pictures 0x0000000000001F9A
Guide 0x000000000000179B
Radio 0x0000000000001F8C
UP 0x0000000000001794
LEFT 0x0000000000001F96
RIGHT 0x0000000000001797
DOWN 0x0000000000001F95
OK 0x00000000000017A5
Back-Exit 0x0000000000001F9F
Menu 0x000000000000178D
Prev-Channel 0x0000000000001F92
Mute 0x000000000000178F
Volume-UP 0x0000000000001F90
Volume-DOWN 0x0000000000001791
Channel-UP 0x0000000000001FA0
Channel-DOWN 0x00000000000017A1
Record 0x0000000000001FB7
Stop 0x00000000000017B6
Rewind 0x0000000000001FB2
Forward 0x00000000000017B4
Play 0x0000000000001FB5
Previous 0x00000000000017A4
Next 0x0000000000001F9E
Pause 0x00000000000017B0
1 0x0000000000001F81
2 0x0000000000001782
3 0x0000000000001F83
4 0x0000000000001784
5 0x0000000000001F85
6 0x0000000000001786
7 0x0000000000001F87
8 0x0000000000001788
9 0x0000000000001F89
0 0x0000000000001780
star 0x0000000000001F8A
hash 0x000000000000178E
red 0x0000000000001F8B
green 0x00000000000017AE
yellow 0x0000000000001FB8
blue 0x00000000000017A9
end codes
end remote
On Sat, 04 Dec 2004 23:09:11 -0400, Kyle Kelly <kyle at kylekelly.com> wrote:
> Joakim Kolsjö wrote:
>
>
>
> >>My tv-out card is an hauppauge wintv pvr 250 and i use the included
> >>remote control.
> >>
> >>
> >
> >"tv-out" hehe... gotta double check my writing sometimes :P
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >mythtv-users mailing list
> >mythtv-users at mythtv.org
> >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> Have you used irrecord to setup your lircd.conf?
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list