[mythtv-users] PVR-350 Issues - Poor Colors

Juan C. Gallardo jgamo at cantv.net
Sat Dec 4 18:51:41 UTC 2004


Is just my idea or your problem is that the HUE is set to 0????

How do you do to change that I don't know, but I know that it shouldn't 
be 0.

Juan

Jim Gifford wrote:

> On one system, not matter what I do I just get black and white.
>
> On the other I just got washed out colors.
>
> I lot of people have asked for the output from ivtv message, so here 
> it is.
>
> Linux video capture interface: v1.00
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.2.0 (rc2z) loading
> ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 350 card
> ivtv: Found an iTVC15 based chip
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
> ivtv: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv: VIA PCI device: 0x3205 vendor: 0x1106
> tveeprom: Ignoring new-style parameters in presence of obsolete ones
> tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 2867052
> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3440 (type = 11)
> ivtv: i2c attach [client=tveeprom[0],ok]
> ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 
> 0x00ad2598, Revision 0x00000001
> ivtv: Radio detected
> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv: i2c attach [client=(tuner unset),ok]
> saa7115: Ignoring new-style parameters in presence of obsolete ones
> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> saa7115: detecting saa7115 client on address 0x42
> saa7115: writing init values
> ivtv: i2c attach [client=saa7115[0],ok]
> saa7115: status: (1E) 0x48, (1F) 0xc0
> saa7127: Ignoring new-style parameters in presence of obsolete ones
> saa7127: video encoder driver version V 0.3 loaded
> saa7127: Selecting NTSC video Standard
> saa7127: Selecting S-Video+Composite
> saa7127: Turn WSS off
> saa7127: Widescreen Mode 4:3 Full Format
> saa7127: Selecting Normal Encoder Input
> saa7127: Enable Video Output
> ivtv: i2c attach [client=saa7127[0],ok]
> msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio 
> mode=simpler
> ivtv: i2c attach [client=MSP3448W-A2,ok]
> tda9885/6/7: chip found @ 0x86
> ivtv: i2c attach [client=tda9887,ok]
> lirc_dev: IR Remote Control driver registered, at major 61
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> ivtv: Encoder revision: 0x02040024
> ivtv: Encoder Firmware is buggy, use version 0x02040011
> ivtv: Decoder revision: 0x02020023
> ivtv: Configuring WinTV PVR 350 card with 9 streams
> ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes 
> total
> ivtv: Registered v4l2 device, streamtype 0 minor 0
> ivtv: Create DMA stream 1 using 8 131072 byte buffers  1048576 kbytes 
> total
> ivtv: Registered v4l2 device, streamtype 1 minor 32
> ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 2 minor 224
> ivtv: Create DMA stream 3 using 16 131072 byte buffers  2097152 kbytes 
> total
> ivtv: Registered v4l2 device, streamtype 3 minor 24
> ivtv: Create stream 4
> ivtv: Registered v4l2 device, streamtype 4 minor 64
> ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes 
> total
> ivtv: Registered v4l2 device, streamtype 5 minor 16
> ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
> ivtv: Registered v4l2 device, streamtype 6 minor 228
> ivtv: Create stream 7
> ivtv: Registered v4l2 device, streamtype 7 minor 232
> ivtv: Create DMA stream 8 using 16 65536 byte buffers  1048576 kbytes 
> total
> ivtv: Registered v4l2 device, streamtype 8 minor 48
> ivtv: ivtv_enc_thread: pid = 1762, itv = 0x21d0eaa0
> ivtv: Setting Tuner 47
> ivtv: ivtv_dec_thread: pid = 1763, itv = 0x21d0eaa0
> tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
> ivtv: Setting audio matrix to input 3, output 1
> ivtv: Switching standard to NTSC.
> spurious 8259A interrupt: IRQ7.
> saa7115: decoder set norm NTSC
> saa7115: set audio: 0x01
> saa7127: Setting Encoder Video Standard
> saa7127: Set NTSC Video Mode
> saa7127: Selecting NTSC video Standard
> ivtv: Initialized WinTV PVR 350, card #0
> ivtv: ====================  END INIT IVTV  ====================
> lirc_i2c: chip found @ 0x18 (Hauppauge IR)
> ivtv: i2c attach [client=Hauppauge IR,ok]
> lirc_dev: lirc_register_plugin:sample_rate: 10
> ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
> ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and 
> has 1704960 bytes.
> ivtv-osd: screen coords: [0 0] -> [720 480]
> ivtv-osd: original global alpha = 208
> ivtv-osd: current OSD state = 39
> ivtv-osd: new global alpha = 208 (1 255 0)
> ivtv-osd: framebuffer at 0xe5510000, mapped to 0x22ac3000, size 1350k
> ivtv-osd: mode is 720x480x32, linelength=2880
> ivtv-osd: fb0: iTVC15 TV out frame buffer device
> saa7115: decoder disable output
> saa7115: decoder set input (0)
> saa7115: now setting Composite input
> ivtv: Setting audio matrix to input 1, output 1
> saa7115: decoder enable output
> saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
> saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
> saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
> saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>



More information about the mythtv-users mailing list