[mythtv-users] PVR-350 Issues - Poor Colors

Jim Gifford maillist at jg555.com
Sat Dec 4 18:26:31 UTC 2004


On one system, not matter what I do I just get black and white.

On the other I just got washed out colors.

I lot of people have asked for the output from ivtv message, so here it is.

Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc2z) loading
ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
tveeprom: Ignoring new-style parameters in presence of obsolete ones
tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 2867052
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 
0x00ad2598, Revision 0x00000001
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: Ignoring new-style parameters in presence of obsolete ones
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler
ivtv: i2c attach [client=MSP3448W-A2,ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
lirc_dev: IR Remote Control driver registered, at major 61
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 using 8 131072 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 16 131072 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: ivtv_enc_thread: pid = 1762, itv = 0x21d0eaa0
ivtv: Setting Tuner 47
ivtv: ivtv_dec_thread: pid = 1763, itv = 0x21d0eaa0
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
spurious 8259A interrupt: IRQ7.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV  ====================
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach [client=Hauppauge IR,ok]
lirc_dev: lirc_register_plugin:sample_rate: 10
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 
1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xe5510000, mapped to 0x22ac3000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
ivtv-osd: fb0: iTVC15 TV out frame buffer device
saa7115: decoder disable output
saa7115: decoder set input (0)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 1, output 1
saa7115: decoder enable output
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0



More information about the mythtv-users mailing list