[mythtv-users] ivtv, mythtv & via 694 ?
Shirley, Mark R
MarkRShirley at eaton.com
Tue Jul 8 14:29:28 EDT 2003
My new box is very quiet and fairly cool. I used a Barton XP 2500+,
with a large Thermalright copper heatsink, an 80mm fan running 2700rpm,
and a WD 120G hard drive. It's very very quiet. I can't even hear it
from 3 feet away.
> -----Original Message-----
> From: Pierre-Olivier Bouchard [mailto:petecool at vl.videotron.ca]
> Sent: Tuesday, July 08, 2003 12:56 PM
> To: Discussion about mythtv
> Subject: Re: [mythtv-users] ivtv, mythtv & via 694 ?
>
>
> Heikki Julkunen wrote:
> > My old box was a 1100Mhz celeron, which was fast enough to run
> > mythtv, and also being able to decode high quality divx movies.
> > My new box is a 600Mhz P3 - fast enough for mythtv but not
> for divx...
> > I also tried my Athlon XP2000+ box, definitely fast enough for both,
> > but very hot/noisy!
> >
> > So if anyone has any hints of how to get a good mythtv box that is:
> > cheap, relatively speedy, and quiet (yes, yes, I know - you
> can only
> > pick two!) :)
>
> You _can_ have speedy, (relatively) cheap and quiet if you
> choose your
> parts correctly...
>
> I would get a Thoroughbred XP1700+, with a BIG heatsink from
> Thermalright or Swiftech with a slow fan, and a Seagate hard
> disk as a
> base. I have mostly that (only the HD is missing, should be coming
> soon), and the only source of noise from my system is the Western
> Digital hard disk's whine; if I unplug the HD, close the
> case, and power
> on, I can't really tell it's on! But then I also have a very silent
> power supply and passive video card cooling...
>
> If you choose the right model of XP, they're not very hot; they have
> many revisions, with differently placed circuitry on the
> core, ending up
> with varying heat outputs for the same frequency; the current
> ones for
> the XP1700+ are cool. Another thing you can try, is undervolting, I
> gained 5C with that.
>
> Overall not much more expensive than a cheap system, if you don't buy
> regulars parts before finding out they're too noisy, and end
> up buying
> others and not returning the noisy ones (you'd end up paying
> twice for
> those parts, not too fun), and choose everything according to
> noise output.
>
> Also, you could try using an i815 chipset motherboard for your P3, I
> have one with a Celeron 1100 Mhz and it's working great.
>
>
> Pete
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at snowman.net
> http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list