[mythtv] [Experimental PATCH] BIG DVB PATCH V1

Endaf Jones jonese at zener.com
Tue Nov 2 03:11:58 UTC 2004


Thank you for the prompt reply.  I was originally pointing to AMC3, but 
I'm a little too far North (51N) with my 90cm dish to get a reliable 
signal (PBS SDTV was okay, but PBS HDTV was breaking up).

Anyone know a easy way (command line maybe?) to issue a DiSEqC motor 
command to move to position? Would save me jumping into Windows just to 
move the dish....

Taylor Jacob wrote:

>Then you can try the scan again except this time use "Transport Scan" and
>specify the transport you just added..

I added the transport manualy and got a bit further.  I get the following:

------------------------------------------------------------
2004-11-01 19:38:42 DVB#0 Status: CARRIER | VITERBI | SIGNAL | SYNC | LOCK.
Table 00 loaded
2004-11-01 19:38:43 SIParser: Tuned to TransportID: 4
2004-11-01 19:38:43 SIParser: NIT Present on this transport on PID 16
2004-11-01 19:38:43 SIParser: Services on this Transport: 1 2 3 4 6 7 8 
9 10 11
 13 14 15 16 17
 Table 00 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 02 loaded
 Table 42 loaded
 SDT sid: 1 WBIF
 SDT sid: 2 KTVC
 SDT sid: 3 KQUP
 SDT sid: 4 WMQF
 SDT sid: 6 KYPX
 SDT sid: 7 KWBF
 SDT sid: 8 KWBS
 SDT sid: 9 WBMM
 SDT sid: 10 WBVT
 SDT sid: 11 WPXS
 SDT sid: 13 KUTH
 SDT sid: 14 KPOU
 SDT sid: 15 KUTF
 SDT sid: 16 KWBM
 SDT sid: 17 DAYSTAR
 Table 02 loaded
 2004-11-01 19:38:44 SIScan: Updating Services
 Service Table Version number: 12
 N: 1  T: 4  CURTID: 4
 2004-11-01 19:38:44 SIScan: Error determing DVB_TID this service table 
is assoc
 iated with so failing
 2004-11-01 19:38:44 SIScan: Service Update Complete
 ScanWizardScanner::finish
 2004-11-01 19:38:48 SIParser: Stopping SIScanner
 2004-11-01 19:38:48 SIParser: SIScanner Stopped
 2004-11-01 19:38:48 Closing DVB channel
 closing DVBStats
 2004-11-01 19:38:48 DVB#0 Status Monitor Stopping
 DVBStats closed
------------------------------------------------------------



>>Xlib: unexpected async reply (sequence 0x32ff)!
>
>I was from time to time getting this error when I was testing PatchV1 before i
>put it out.. I was hopeing it was a remote X over ssh over wifi timing issue,
>but apparently its not.. (Anyone else have any clue as to how to look deeper
>into this?).  I am positive its related to the signal meters in the scan dialog
>but its been difficult to reproduce for me..
>
>Can you send me a backtrace of setup if you can get the async reply to happen
>again..
>
I will do a backtrace (as soon as I figure how how?)  I was able stop 
the scan before the error pops up if I hit finish after it appears to be 
finished scanning.

# Endaf





Taylor Jacob wrote:

>>I'm pointing at Galaxy 10R, with several FTA signals.  I have a switch
>>with the 3rd port connected to my linear LNB.  I also have a motor, but
>>I'm not playing with that at the moment (I just moved it to the
>>satellite positions with my Windows machine).
>>    
>>
>
>Many of the networks that are on those birds don't send a NIT Table (Network
>Information Table) since their "network" consists of 1 transponder.. Some send
>garbage (try to scan the CCTV feeds at 95W and look at the Transport it will
>add its quite entertaining).. This verson of the code won't add a transport
>based on your current tuning settings (I will be adding this at some point). 
>The way the scan is setup right now the full scan won't work unless you get a
>NIT table that has valid data..
>
>One alternative is to go into the Videosource Screen and manually add the
>transponders to that videosource.. The menus are bit quirky right now for
>transport editing, but you should be able to do what you need..
>
>Then you can try the scan again except this time use "Transport Scan" and
>specify the transport you just added..
>
>I will have to move my dish over to some other FTA signals and see how it goes..
>I have been messing with AMC3 mostly (The ATSC PBS Feeds), and I wasn't think
>about it when I put out the patch, but I had to manually put the transports
>into the DB before the scans would work for those channels..
>
>  
>
>>------------------------------------------------
>>Processing Transport List
>>Network DiviCom Test Processing
>>finished processing Transport List
>>-------------------------------------------------
>>    
>>
>
>It looks like all they are sending is the Network Name, but no Transports here
>(see my above reply)
>
>  
>
>>Xlib: unexpected async reply (sequence 0x32ff)!
>>    
>>
>
>I was from time to time getting this error when I was testing PatchV1 before i
>put it out.. I was hopeing it was a remote X over ssh over wifi timing issue,
>but apparently its not.. (Anyone else have any clue as to how to look deeper
>into this?).  I am positive its related to the signal meters in the scan dialog
>but its been difficult to reproduce for me..
>
>Can you send me a backtrace of setup if you can get the async reply to happen
>again..
>
>  
>
>>I hit finish when the signal levels stop jumping around and the screen
>>changes and doesn't refresh and looks like locks up.  I have to ^C setup
>>to get out of it.
>>    
>>
>
>Yeah when the signal meters froze it was because of that async message, and then
>its unable to delete the objects and hangs waiting for the objects to delete..
>
>
>
>_______________________________________________
>mythtv-dev mailing list
>mythtv-dev at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>  
>



More information about the mythtv-dev mailing list