[mythtv] Bug ?

Nicolas Strina nicolas.strina at ip-man.net
Wed Jun 23 07:44:36 EDT 2004


Re,

Since this morning i did test with a few drivers Here is the list:

ivtv-0.1.10-pre2-ck94p   
ivtv-0.1.10-pre2-ck95h
ivtv-0.1.10-pre2-ck65b <ivtv-0.1.10-pre2-ck65b.tgz>
ivtv-0.1.10-pre2-ck69l

The 94p seems to work but i still have snow on the screen ;) Certainly a 
tuner config problem.
I'm trying to fix the tuner with the 94p. If it works i will let you 
know otherwise i will try the 71d.

Regards,

Nicolas

PS: Since i am free today i would be happy if my test can help the 
drivers devel.

> Definitely for the ivtv list and Lucas is right those recent ck 
> patches differ wildly in usability and most of the time there is more 
> than one a day. I myself use 71d for quite some time now and it works 
> like a charm.
>
> But you might want to post your results to the ivtv list because your 
> feedback might very well help Chris and Hans to improve the driver.
>
> Cheers,
> -Tako
>
> Nicolas Strina wrote:
>
>> Hello,
>>
>> In fact someone told me (on mythtv user ml) to come here to post the 
>> problem ;)
>> So let's try with your version.
>>
>> Cu,
>>
>> Nicolas
>>
>>> Hey Nicolas,
>>>
>>> You might want to try the ivtv mailing list.
>>> You always need to be careful which recent ck patch you get, because 
>>> they're a bit of a hit and miss.. a lot of different stuff is being 
>>> tried. FYI, I'm using 65b which works really well for me.
>>>
>>> Bye, Lucas
>>>
>>>
>>>> I'm using ivtv-0.1.10-pre2-ck95h since this morning. All the 
>>>> modules are loading fine but  .... I have nothing on the screen 
>>>> when i'm trying to watch the TV but a few colors sometimes ..
>>>> I'm running a Gentoo with a Kernel 2.6.5-r1 without any patches but 
>>>> the ones of gentoo. In Switzerland the tuner type seems to be 28 
>>>> but i'm not 100% sure .. But i did test with type 3, 20 and 28 and 
>>>> still the same.
>>>>
>>>> However i have this in dmesg:
>>>>
>>>> <snip>
>>>> saa7115: decoder set picture bright=127 contrast=64 saturation=64 
>>>> hue=0
>>>> saa7115: decoder set picture bright=127 contrast=63 saturation=64 
>>>> hue=0
>>>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 
>>>> hue=0
>>>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 
>>>> hue=0
>>>> saa7115: decoder disable output
>>>> saa7115: decoder enable output
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>
>>>> Here is my modprobe.conf and the output of dmesg
>>>>
>>>> Thanks,
>>>>
>>>> Nicolas
>>>>
>>>> alias char-major-61 lirc_i2c
>>>> alias char-major-81 videodev
>>>> alias char-major-81-0 ivtv
>>>> alias char-major-81-1 bttv
>>>> alias /dev/v4l ivtv
>>>> options ivtv ivtv_debug=1 tuner=28
>>>> options msp3400 once=1 simple=1
>>>> add below ivtv msp3400 saa7115 tuner saa7127
>>>> add above ivtv lirc_dev lirc_i2c ivtv-fb
>>>>
>>>> Linux video capture interface: v1.00
>>>> saa7127: video encoder driver version V 0.3 loaded
>>>> ivtv: version 0.1.10 (0.1.10pre2-ck95h) loading
>>>> ivtv: Autodetected WinTV PVR 350rev1 card
>>>> ivtv: Found an iTVC15 based chip
>>>> ivtv: pci: PCIBUS detected device: 0x2578 vendor: 0x8086
>>>> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) 
>>>> mode, simpler (G) no-thread mode
>>>> msp34xx: $Id$ compiled on: Jun 23 2004 12:03:55
>>>> ivtv: i2c attach [client=MSP3418W-A2,ok]
>>>> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>>>> saa7115: detecting saa7115 client on address 0x42
>>>> saa7115: writing init values
>>>> ivtv: i2c attach [client=saa7115[0],ok]
>>>> saa7115: status: (1E) 0x50, (1F) 0xc0
>>>> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>>>> ivtv: i2c attach [client=(tuner unset),ok]
>>>> saa7127: Selecting NTSC video Standard
>>>> saa7127: Selecting S-Video+Composite
>>>> saa7127: Turn WSS off
>>>> saa7127: Widescreen Mode 4:3 Full Format
>>>> saa7127: Selecting Normal Encoder Input
>>>> saa7127: Enable Video Output
>>>> ivtv: i2c attach [client=saa7127[0],ok]
>>>> tveeprom: Hauppauge: model = 48134, rev = J347, serial# = 7112005
>>>> tveeprom: tuner = LG TP18PSB01D (idx = 47, type = 28)
>>>> tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>>>> tveeprom: audio_processor = CS5331 (type = 9)
>>>> ivtv: i2c attach [client=tveeprom[0],ok]
>>>> ivtv: Tuner Type 28, Tuner formats 0x00000007, Radio: yes, Model 
>>>> 0x00a93517, Revision 0x00000001
>>>> ivtv: PAL tuner detected
>>>> ivtv: Radio detected
>>>> ivtv: Encoder revision: 0x02040011
>>>> ivtv: Decoder revision: 0x02020023
>>>> ivtv: Configuring WinTV PVR 350rev1 card with 10 streams
>>>> ivtv: Create DMA stream 0 using 128 buffers of size 32768
>>>> ivtv: Create DMA stream 1 using 128 buffers of size 32768
>>>> ivtv: Create stream 2 using 64 buffers of size 32768
>>>> ivtv: Create DMA stream 3 using 32 buffers of size 32768
>>>> ivtv: Create stream 4
>>>> ivtv: Create DMA stream 5 using 128 buffers of size 32768
>>>> ivtv: Create stream 6 using 64 buffers of size 32768
>>>> ivtv: Create DMA stream 8 using 124 buffers of size 32768
>>>> ivtv: Create stream 7
>>>> ivtv: Create DMA stream 9 using 512 buffers of size 32768
>>>> ivtv: Setting Tuner 28
>>>> tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) by ivtv i2c 
>>>> driver #0
>>>> tuner: TV freq (201587992.00) out of range (44-958)
>>>> ivtv: Setting audio matrix to input 3, output 1
>>>> ivtv: Switching standard to PAL.
>>>> tuner: TV freq (201587992.00) out of range (44-958)
>>>> saa7115: decoder set norm PAL
>>>> saa7115: set audio: 0x01
>>>> saa7127: Setting Encoder Video Standard
>>>> saa7127: Set PAL Video Mode
>>>> saa7127: Selecting PAL video Standard
>>>> ivtv: Initialized WinTV PVR 350rev1, card #0
>>>> lirc_dev: IR Remote Control driver registered, at major 61
>>>> bttv: driver version 0.9.12 loaded
>>>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>>>> ivtv: i2c attach [client=Hauppauge IR,ok]
>>>> lirc_dev: lirc_register_plugin:sample_rate: 6
>>>> ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
>>>> ivtv-osd: screen coords: [0 0] -> [720 576]
>>>> ivtv-osd: original global alpha = 208
>>>> ivtv-osd: current OSD state = 39
>>>> ivtv-osd: new global alpha = 208 (1 255 0)
>>>> ivtv-osd: Good video_base is inside valid allocated space.
>>>> ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe2a58000, size 1665k
>>>> ivtv-osd: mode is 720x576x32, linelength=2880
>>>> ivtv-osd: fb0: iTVC15 TV out frame buffer device
>>>> EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 
>>>> filesystem as ext2
>>>> ivtv: Switching standard to PAL.
>>>> tuner: TV freq (201587992.00) out of range (44-958)
>>>> saa7115: decoder set norm PAL
>>>> saa7115: set audio: 0x01
>>>> saa7127: Setting Encoder Video Standard
>>>> saa7127: Set PAL Video Mode
>>>> saa7127: Selecting PAL video Standard
>>>>
>>>>
>>>> _______________________________________________
>>>> mythtv-dev mailing list
>>>> mythtv-dev at mythtv.org
>>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> _______________________________________________
>>> mythtv-dev mailing list
>>> mythtv-dev at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>  
>>>
>>
>>
>> _______________________________________________
>> mythtv-dev mailing list
>> mythtv-dev at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>
>
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>




More information about the mythtv-dev mailing list