[mythtv] Bug ?

Wed Jun 23 07:31:12 EDT 2004

Definitely for the ivtv list and Lucas is right those recent ck patches 
differ wildly in usability and most of the time there is more than one a 
day. I myself use 71d for quite some time now and it works like a charm.

But you might want to post your results to the ivtv list because your 
feedback might very well help Chris and Hans to improve the driver.

Cheers,
 -Tako

Nicolas Strina wrote:

> Hello,
>
> In fact someone told me (on mythtv user ml) to come here to post the 
> problem ;)
> So let's try with your version.
>
> Cu,
>
> Nicolas
>
>> Hey Nicolas,
>>
>> You might want to try the ivtv mailing list.
>> You always need to be careful which recent ck patch you get, because 
>> they're a bit of a hit and miss.. a lot of different stuff is being 
>> tried. FYI, I'm using 65b which works really well for me.
>>
>> Bye, Lucas
>>
>>
>>> I'm using ivtv-0.1.10-pre2-ck95h since this morning. All the modules 
>>> are loading fine but  .... I have nothing on the screen when i'm 
>>> trying to watch the TV but a few colors sometimes ..
>>> I'm running a Gentoo with a Kernel 2.6.5-r1 without any patches but 
>>> the ones of gentoo. In Switzerland the tuner type seems to be 28 but 
>>> i'm not 100% sure .. But i did test with type 3, 20 and 28 and still 
>>> the same.
>>>
>>> However i have this in dmesg:
>>>
>>> <snip>
>>> saa7115: decoder set picture bright=127 contrast=64 saturation=64 hue=0
>>> saa7115: decoder set picture bright=127 contrast=63 saturation=64 hue=0
>>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>> saa7115: decoder disable output
>>> saa7115: decoder enable output
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>
>>> Here is my modprobe.conf and the output of dmesg
>>>
>>> Thanks,
>>>
>>> Nicolas
>>>
>>> alias char-major-61 lirc_i2c
>>> alias char-major-81 videodev
>>> alias char-major-81-0 ivtv
>>> alias char-major-81-1 bttv
>>> alias /dev/v4l ivtv
>>> options ivtv ivtv_debug=1 tuner=28
>>> options msp3400 once=1 simple=1
>>> add below ivtv msp3400 saa7115 tuner saa7127
>>> add above ivtv lirc_dev lirc_i2c ivtv-fb
>>>
>>> Linux video capture interface: v1.00
>>> saa7127: video encoder driver version V 0.3 loaded
>>> ivtv: version 0.1.10 (0.1.10pre2-ck95h) loading
>>> ivtv: Autodetected WinTV PVR 350rev1 card
>>> ivtv: Found an iTVC15 based chip
>>> ivtv: pci: PCIBUS detected device: 0x2578 vendor: 0x8086
>>> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, 
>>> simpler (G) no-thread mode
>>> msp34xx: $Id$ compiled on: Jun 23 2004 12:03:55
>>> ivtv: i2c attach [client=MSP3418W-A2,ok]
>>> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>>> saa7115: detecting saa7115 client on address 0x42
>>> saa7115: writing init values
>>> ivtv: i2c attach [client=saa7115[0],ok]
>>> saa7115: status: (1E) 0x50, (1F) 0xc0
>>> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>>> ivtv: i2c attach [client=(tuner unset),ok]
>>> saa7127: Selecting NTSC video Standard
>>> saa7127: Selecting S-Video+Composite
>>> saa7127: Turn WSS off
>>> saa7127: Widescreen Mode 4:3 Full Format
>>> saa7127: Selecting Normal Encoder Input
>>> saa7127: Enable Video Output
>>> ivtv: i2c attach [client=saa7127[0],ok]
>>> tveeprom: Hauppauge: model = 48134, rev = J347, serial# = 7112005
>>> tveeprom: tuner = LG TP18PSB01D (idx = 47, type = 28)
>>> tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>>> tveeprom: audio_processor = CS5331 (type = 9)
>>> ivtv: i2c attach [client=tveeprom[0],ok]
>>> ivtv: Tuner Type 28, Tuner formats 0x00000007, Radio: yes, Model 
>>> 0x00a93517, Revision 0x00000001
>>> ivtv: PAL tuner detected
>>> ivtv: Radio detected
>>> ivtv: Encoder revision: 0x02040011
>>> ivtv: Decoder revision: 0x02020023
>>> ivtv: Configuring WinTV PVR 350rev1 card with 10 streams
>>> ivtv: Create DMA stream 0 using 128 buffers of size 32768
>>> ivtv: Create DMA stream 1 using 128 buffers of size 32768
>>> ivtv: Create stream 2 using 64 buffers of size 32768
>>> ivtv: Create DMA stream 3 using 32 buffers of size 32768
>>> ivtv: Create stream 4
>>> ivtv: Create DMA stream 5 using 128 buffers of size 32768
>>> ivtv: Create stream 6 using 64 buffers of size 32768
>>> ivtv: Create DMA stream 8 using 124 buffers of size 32768
>>> ivtv: Create stream 7
>>> ivtv: Create DMA stream 9 using 512 buffers of size 32768
>>> ivtv: Setting Tuner 28
>>> tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) by ivtv i2c driver #0
>>> tuner: TV freq (201587992.00) out of range (44-958)
>>> ivtv: Setting audio matrix to input 3, output 1
>>> ivtv: Switching standard to PAL.
>>> tuner: TV freq (201587992.00) out of range (44-958)
>>> saa7115: decoder set norm PAL
>>> saa7115: set audio: 0x01
>>> saa7127: Setting Encoder Video Standard
>>> saa7127: Set PAL Video Mode
>>> saa7127: Selecting PAL video Standard
>>> ivtv: Initialized WinTV PVR 350rev1, card #0
>>> lirc_dev: IR Remote Control driver registered, at major 61
>>> bttv: driver version 0.9.12 loaded
>>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>>> ivtv: i2c attach [client=Hauppauge IR,ok]
>>> lirc_dev: lirc_register_plugin:sample_rate: 6
>>> ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
>>> ivtv-osd: screen coords: [0 0] -> [720 576]
>>> ivtv-osd: original global alpha = 208
>>> ivtv-osd: current OSD state = 39
>>> ivtv-osd: new global alpha = 208 (1 255 0)
>>> ivtv-osd: Good video_base is inside valid allocated space.
>>> ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe2a58000, size 1665k
>>> ivtv-osd: mode is 720x576x32, linelength=2880
>>> ivtv-osd: fb0: iTVC15 TV out frame buffer device
>>> EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 
>>> filesystem as ext2
>>> ivtv: Switching standard to PAL.
>>> tuner: TV freq (201587992.00) out of range (44-958)
>>> saa7115: decoder set norm PAL
>>> saa7115: set audio: 0x01
>>> saa7127: Setting Encoder Video Standard
>>> saa7127: Set PAL Video Mode
>>> saa7127: Selecting PAL video Standard
>>>
>>>
>>> _______________________________________________
>>> mythtv-dev mailing list
>>> mythtv-dev at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>
>>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> mythtv-dev mailing list
>> mythtv-dev at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>  
>>
>
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev