[mythtv-users] LiveTV access was working, somehow I stopped it working

Klaas de Waal klaas.de.waal at gmail.com
Wed Jan 1 11:19:31 UTC 2020


On Wed, 1 Jan 2020 at 11:14, <lists at arewethere.net> wrote:
>
> Greetings mythizens
>
> I would love to hear some ideas about how to fix this.
> I don't _need_ LiveTV but it is handy to have.
> Planning to upgrade to v30 but it's not an option for a few weeks.
>
> I installed a new card [1] in my system today [2].
> I left an existing card [3] in place.
> I rearranged the antenna connection so that there was a splitter
> plugged into the new card, with the antenna connection on one side
> and the existing card on the other.
>
> After stopping the backend, running mythtv-setup (deleted all tuners
> and added them back, setup input connections, etc) and then restarting
> the backend and running mythfilldatabase;
> I started the frontend and tried to check things by starting live TV.
>
> At first, everything was fine, using the new card's tuners.
> Then I used the on-screen menu to change the Live TV source to be
> one of the existing card's tuners. This worked but showed that the
> card was struggling a bit for adequate signal.
>
> At this point I exited Live TV (did not switch the LiveTV source
> back to one of the new card tuners) and started rearranging coax
> to try and provide a bit more signal to the older, existing card.
> The issue I hit was that I could no longer start Live TV.
> I would press 'ok' on the LiveTV menu item and get a 'please wait'
> popup for less than a second, then back to the main menu.
> In the backend log I found this being logged on each attempt:
>
>  mythbackend[5126]: I TVRecEvent tv_rec.cpp:1090 (HandleStateChange) TVRec[1]: Changing from None to WatchingLiveTV
>  mythbackend[5126]: I TVRecEvent tv_rec.cpp:3665 (TuningFrequency) TVRec[1]: TuningFrequency
>  mythbackend[5126]: W TVRecEvent dtvmultiplex.cpp:315 (ParseDVB_T2) DTVMux: Invalid T2 modulation system parameter  '', aborting.
>  mythbackend[5126]: E TVRecEvent recorders/dtvchannel.cpp:300 (SetChannelByString) DTVChan[1](/dev/dvb/adapter0/frontend0): SetChannelByString(10): Failed to initialize multiplex options
>  mythbackend[5126]: E TVRecEvent tv_rec.cpp:3743 (TuningFrequency) TVRec[1]: Failed to set channel to 10. Reverting to kState_None
>  mythbackend[5126]: I TVRecEvent tv_rec.cpp:1090 (HandleStateChange) TVRec[1]: Changing from WatchingLiveTV to None
>
> After trying several things, I still cannot get Live TV working.
> I think what has happened is myth has saved the Live TV input as
> one which doesn't really have enough signal, but I'm not sure.
> I don't see any way to tell what tuner LiveTV is trying or any
> way to control which one it initially tries.
>
> Things I have tried, to no avail
>  - delete channel "10" with the mythtweb channel editor
>  - the new card tuners were configured to start at channel number 7,
>    while the older ones were configured to start at channel 10.
>    Change the initial channel for live tv from 10 to 7.
>  - delete all tuners, add back only the new card ones,
>    connect inputs as before. (the old card is still installed)
>  - reboot
>
> Recordings (with just the new card's tuners) seem to be working fine.
> Have not tried scheduled recording with the old card's tuners.
>

My preferred way of starting live TV is via the program guide. Press
the Menu or the Enter button when on a program near or at the current
time and then you get a popup menu with the  option "Watch this
channel".  This gives you live TV on a selected channel and this way
you avoid using the initial channel value from the database.
About your tuners, I would start with only one tuner and get that
working correctly. After that, add the second tuner etc.

Klaas.


More information about the mythtv-users mailing list