[mythtv-users] HDHR prob with new wallwarts
darylangela at gmail.com
Thu Dec 12 18:29:01 UTC 2019
On Sat, Dec 7, 2019, 11:36 AM Allen Edwards <allen.p.edwards at gmail.com>
> I have no idea if this will be helpful but I had several issues getting my
> HDHR tuners to work. I provide these in case they might be useful.
> Myth address is 192.168.1.111 and is static. I set it as reserved on the
> router. I also set the HDHR addresses as reserved.
> I start the tuners from rc.local. Old school but works.
> Here is the code. I believe this was from the vendors website.
> hdhomerun_config 10137DC1 set /ir/target "192.168.1.111:5000 no_clear"
> If you need to allow more time to go by, you can add a delay before this
This part is outside my capabilities, probably would need more time if I
get the mobo to play nice with ACPI.
> I had a power supply issue as well. The module that I bought with the HDHR
> did not put out enough current so I got ones rated for more current.
> I also had random failures. The computer would lose contact with the
> turners every few weeks. I traced it to a linux problem as the tuners were
> still visible from a Windows computer on the same network. That
> troubleshooting tip was provided by Silicon Dust.
> Here is the solution.
> dad at NewMyth:~$ more /etc/network/interfaces
> # interfaces(5) file used by ifup(8) and ifdown(8)
> auto lo
> iface lo inet loopback
> auto enp2s0
> iface enp2s0 inet static
> address 192.168.1.111
> netmask 255.255.255.0
> gateway 192.168.1.1
> broadcast 192.168.1.255
> dns-nameservers 18.104.22.168 22.214.171.124
> Hope this helps.
I've set my FE/BE reserved to .210 and the HDHRs to .211, and .212, no
change to gateway and netmask, beyond this I need help.
> mythtv-users mailing list
> mythtv-users at mythtv.org
> MythTV Forums: https://forum.mythtv.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users