[mythtv-users] Blasting to STB,using a MCEUSB
Dave Pearson (Lists)
lists at the-pearsons.co.uk
Fri Oct 5 18:22:12 UTC 2018
> On 5 Oct 2018, at 18:22, Stephen Worthington <stephen_agent at jsw.gen.nz> wrote:
>
>> On Fri, 5 Oct 2018 16:59:46 +0100, you wrote:
>>
>> I’m so close it hurts!
>>
>> Ok, so my ~/.lirc/mythtv file looks like this:
>>
>> begin
>> remote = devinput-32
>> prog = mythtv
>> button = left
>> config = left
>> end
>>
>> Etc.
>>
>> My ~/.lircrc file looks like this:
>>
>> include ~/.lirc/mythtv
>>
>> And I can see the key presses in irw
>>
>> I’ve restarted my front end and it’s still not working - there’s got to be something else, obvious, that I’m just not spotting - any ideas?
>>
>> (Just noticed, this thread is actually about controlling a set top box, not controlling the frontend, sorry about hijacking it - this should have stayed in the other thread)
>>
>> Regards,
>> Dave
>
> Shut down mythfrontend and try "ircat mythtv" from a command prompt
> with the same user as mythfrontend is run from. Does that show any
> input from the remote?
>
> Also, I have just done the 16.04 to 18.04.1 upgrade on my main MythTV
> box, and for some reason the lirc update did not install the new
> /etc/lirc/lircd.conf file. Check if that happened to you. It should
> look like this:
>
> # Populated config files can be found at http://sf.net/p/lirc-remotes.
> The
> # irdb-get(1) and lirc-setup(1) tools can be used to search and
> download
> # config files.
> #
> # From 0.9.2 config files could just be dropped as-is in the
> lircd.conf.d
> # directory and be included by this file.
>
> include "lircd.conf.d/*.conf"
>
>
> If it does not, then you need to do this from a root prompt:
>
> cd /etc/lirc
> cp -a lircd.conf.dist lircd.conf
>
> If you want to keep the old lircd.conf, rename it first:
>
> mv lircd.conf lircd.conf.16.04
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
Hi Stephen,
ircat mythtv doesn’t show any input from the remote
I do have a lircd.conf file in /etc/lirc
Regards,
Dave
More information about the mythtv-users
mailing list