[mythtv-users] Updated to 0.29 now can't connect to backend

[Damian]

On 20/01/2018 17:33, Paul Harrison wrote:
> On 20/01/18 15:45, Damian wrote:
>
>> On 20/01/2018 13:46, Tim Draper wrote:
>>>   ---- On Sat, 20 Jan 2018 13:18:16 +0000 Peter Bennett 
>>> <pb.mythtv at gmail.com> wrote ----
>>>   > I suggest go into mythtv-setup on the backend and check the main
>>>   > settings. The IP address setup has changed since 0.28. There is 
>>> a new
>>>   > way to select the master backend and a new setting to allow 
>>> connections
>>>   > from all networks. I think the problem may be somewhere in 
>>> there. Make
>>>   > sure all of those are set correctly.
>>>   >
>>>   >
>>> this was my problem when i updated to 29. something in the 
>>> mythtv-setup where the SQL server/db/authentication is configured.  
>>> took me a while to figure that one as theres an extra box or two 
>>> that needs completing vs a =<28 deployment.
>>> annoyingly, i cant find my notes on my 29 deployment; i swear i 
>>> wrote down whatever setting it was. a reference to 'Master Backend' 
>>> rings a bell...
>>>
>> Damn, that's sounds hard to unpick.
>>
>> MySql scares me at the best of times! I can't do anything with that 
>> other than copy and paste commands from people who know much more 
>> than me, and even that's got me into lots of trouble in the past.
>>
>> :-(
>
> I think you misunderstood you don't have to mess with MySql just 
> change some settings in myth-setup.
>
> I would stop mythbackend before starting mythtv-setup. Don't rely on 
> mythtv-setup stopping it for you it rarely works!
>
> Then on the first page of settings '1. General' there are settings on 
> there that you need to play with until you get it to work. What I have 
> on a master BE with a frontend and allowing remote FE's to connect are 
> 'Listen on All IP Addresses' should be checked, 'The primary IP 
> address' should be the IP address other frontends will use to connect 
> to the BE not a localhost address and 'This server is the Master 
> Backend should be checked. The names may be slightly different since 
> I'm on 30.0-pre but should give you an idea what to change.
>
> Paul H.

All sorted! :-)

I don't think I really did anything. Certainly don't remember changing 
anything significant. Just going into the backend set up, looking 
around, and then exiting (saving 'changes') seemed to kick it all into gear!

Thanks everyone. I'm back in action!

Cheers,
Damian