[mythtv-users] ir-keytable not receiving on Debian 9

[Bob]

I upgraded my ECS Liva from Debian 8 to Debian 9. Everything appears to 
be OK, except I cannot receive IR signals anymore. However, everything 
seems to be OK.

# ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
         Driver mceusb, table rc-rc6-mce
         Supported protocols: unknown other lirc rc-5 rc-5-sz jvc sony 
nec sanyo mce_kbd rc-6 sharp xmp
         Enabled protocols: lirc rc-5 jvc sony nec rc-6
         Name: Media Center Ed. eHome Infrared
         bus: 3, vendor/product: 1934:5168, version: 0x0001
         Repeat delay = 500 ms, repeat period = 125 ms

In addition, Xorg appears to see it as well:

[   416.138] (II) config/udev: Adding input device Media Center Ed. 
eHome Infrared Remote Transceiver (1934:5168) (/dev/input/event5)
[   416.139] (**) Media Center Ed. eHome Infrared Remote Transceiver 
(1934:5168): Applying InputClass "evdev keyboard catchall"
[   416.139] (**) Media Center Ed. eHome Infrared Remote Transceiver 
(1934:5168): Applying InputClass "libinput keyboard catchall"
[   416.139] (II) Using input driver 'libinput' for 'Media Center Ed. 
eHome Infrared Remote Transceiver (1934:5168)'
[   416.139] (**) Media Center Ed. eHome Infrared Remote Transceiver 
(1934:5168): always reports core events
[   416.139] (**) Option "Device" "/dev/input/event5"
[   416.139] (**) Option "_source" "server/udev"
[   416.140] (II) input device 'Media Center Ed. eHome Infrared Remote 
Transceiver (1934:5168)', /dev/input/event5 is tagged by udev as: Keyboard
[   416.140] (II) input device 'Media Center Ed. eHome Infrared Remote 
Transceiver (1934:5168)', /dev/input/event5 is a keyboard
[   416.156] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/rc/rc0/input3/event5"
[   416.185] (II) XINPUT: Adding extended input device "Media Center Ed. 
eHome Infrared Remote Transceiver (1934:5168)" (type: KEYBOARD, id 10)

However, when I capture signals I don't get anything:

# ir-keytable -c -p NEC,RC-5,RC-6,JVC,SONY -t
Old keytable cleared
Protocols changed to rc-5 jvc sony nec rc-6
Testing events. Please, press CTRL-C to abort.


This was working 2 days ago with Debian 8/Jessie. What am I missing?