[mythtv-users] EDID and Sony TV
Michael A Weber
mweberjunk01 at gmail.com
Sun Feb 14 21:44:37 UTC 2016
> On Feb 14, 2016, at 2:18 PM, glen <glenb at glenb.us> wrote:
>
> On Sun, 2016-02-14 at 19:31 +0100, Josu Lazkano wrote:
>> 2016-02-14 18:49 GMT+01:00 Michael A Weber <mweberjunk01 at gmail.com <mailto:mweberjunk01 at gmail.com>>:
>>>
>>>
>>>>
>>>> On Feb 14, 2016, at 6:18 AM, Josu Lazkano <josu.lazkano at gmail.com <mailto:josu.lazkano at gmail.com>> wrote:
>>>>
>>>> Hello all,
>>>>
>>>> I have a little problem with Sony TV.
>>>>
>>>> I use to suspend to disk instead of power off the frontend.
>>>>
>>>> In the resume I use to power on the TV with a CEC command, it works
>>>> well, but the problem is that the TV HDMI 1 input is in black. I need
>>>> to change to HDMI 2 and then to HDMI 1 to get it working.
>>>>
>>>> I read this wiki page:
>>>> https://www.mythtv.org/wiki/Nvidia-cards_and_no_picture_when_box_is_on_before_the_TV <https://www.mythtv.org/wiki/Nvidia-cards_and_no_picture_when_box_is_on_before_the_TV>
>>>>
>>>> I extract the EDID file and add in /etc/X11/xorg.conf:
>>>> http://paste.debian.net/386096/ <http://paste.debian.net/386096/>
>>>>
>>>> I reboot the frontend and this is what I have in the xorg log:
>>>> http://paste.debian.net/386098/ <http://paste.debian.net/386098/>
>>>>
>>>> It says "The EDID for SONY TV (DFP-1) contradicts itself".
>>>>
>>>> Need I configure something else?
>>>>
>>>> I will appreciate your help.
>>>>
>>>> Regards.
>>>>
>>>> --
>>>> Josu Lazkano
>>>
>>>
>>> Josu—
>>>
>>> No matter what I tried several years ago with my Sony TV and the Nvidia card, they would never play nicely together. I was forced to specify the modeline and such for the TV on the front-end, and I have never had a problem since. I even moved to minimyth2 for my front-end, specify the modeline and such for that front-end, and all is well in the end.
>>>
>>> Stephen is right; Sony EDID is bad. Don’t use it.
>>>
>>> Mike
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
>>> http://lists.mythtv.org/mailman/listinfo/mythtv-users <http://lists.mythtv.org/mailman/listinfo/mythtv-users>
>>> http://wiki.mythtv.org/Mailing_List_etiquette <http://wiki.mythtv.org/Mailing_List_etiquette>
>>> MythTV Forums: https://forum.mythtv.org <https://forum.mythtv.org/>
>>
>>
>> Thanks both,
>>
>> I try to add this lines:
>>
>> Option "UseDisplayDevice" "DFP-1"
>> Option "ConnectedMonitor" "DFP-1"
>>
>> And this is what I have in the log: http://paste.debian.net/386811/ <http://paste.debian.net/386811/>
>>
>> How could I force to specify the modeline?
>>
>> I will really appreciate your help.
>>
>> Thanks and regards.
>>
>
> josh i had similar kinds of problems with my sony: my xorg.conf.d nvidia.conf looks like this:
>
> Section "Monitor"
> Identifier "HDMI-0"
> VendorName "SONY"
> ModelName "KDL40EX500"
> Option "UseEdidFreqs" "False"
> HorizSync 20.0 - 94.0
> VertRefresh 23.0 - 90.0
> Option "UseHotplugEvents" "false"
> Option "DPMS" "false"
> Option "DisplaySize" "942 548"
> Option "ExactModeTimingsDVI" "True"
> ModeLine "1920x1080 at 50 <mailto:1920x1080 at 50>" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
> ModeLine "1920x1080 at 60 <mailto:1920x1080 at 60>" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
> #ModeLine "1920x1080 at 24 <mailto:1920x1080 at 24>" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
> #ModeLine "1920x1080 at 23.976 <mailto:1920x1080 at 23.976>" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
> Modeline "1920x1080 at 50i <mailto:1920x1080 at 50i>" 74.250 1920 2448 2492 2640 1080 1085 1095 1125 +hsync +vsync Interlace
> Modeline "1920x1080 at 60i <mailto:1920x1080 at 60i>" 74.250 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync interlace
> ModeLine "1920x1080 at 59.94 <mailto:1920x1080 at 59.94>" 148.350 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
> Modeline "1920x1080 at 59.94i <mailto:1920x1080 at 59.94i>" 74.175 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync interlace
> ModeLine "1920x1080 at 25 <mailto:1920x1080 at 25>" 74.250 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
> EndSection
>
> Section "Device"
> Identifier "Card0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> Option "ConnectedMonitor" "DFP-2"
> Option "UseEdidDpi" "False"
> Option "DPI" "96 x 96"
> Option "ModeValidation" "AllowNonEdidModes,NoVesaModes,NoXServerModes"
> EndSection
>
> this works for me and both myth and kodi change the refresh rates properly.
>
> _______________________________________________
Mine us much simpler. I specify:
HorizSync 15.0-70.0
VertRefresh 58.0-62.0
ModeLine "1920x1080" 148.3 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
This is for a KDL-55XBR8. You’ll of course have to find out the correct values for your model of TV. I was able to google and find mine back in 2009, so yours hopefully will be available.
Enjoy!
Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20160214/e909eb38/attachment.html>
More information about the mythtv-users
mailing list