[mythtv-users] lirc config for u-verse (Cisco IPN4320)

[Richard F. Ostrow Jr.]

On 2015-11-01 22:16, Gary Buhrmaster wrote:
> On Mon, Nov 2, 2015 at 2:01 AM, Richard F. Ostrow Jr.
> <rich at warfaresdl.com> wrote:
> ....
>> Yeah, I tried a motorolla VIP 1200 config, but irw was silent when I 
>> pointed
>> my remote at it and tried a few buttons. Unless you're implying that 
>> the
>> device understands additional codes beyond the remote itself... that 
>> would
>> be interesting, and I'd have to set up my blaster to test it with
> 
> I have seen cases where the configs in lirc only worked for blasting,
> but a "correct" config should work for either.
> 
> As John Adams indicated, this is likely a RC-MM protocol.  There are a
> couple of additional "starter set" configs for that, and may be where 
> you
> need to go if Mr. Adams file is not adequite.
> 
> I presume you have browsed the lirc configs at:
> http://lirc-remotes.sourceforge.net/remotes-table.html
> 
> including (for u-verse):
> 
> https://sf.net/p/lirc-remotes/code/ci/master/tree/remotes/att/U-Verse.lircd.conf
> 
> Good luck.

I have indeed seen those, but have not managed to get my remote to 
acknowledge them via irw.

However, I do have some good news... despite irw not recognizing the 
codes from the VIP 1200 as what is coming out of my remote, the box 
_does_ appear to respond to it. I need to get better positioning on my 
blaster (as it appears to only get a few of the transmissions), but I 
think the earlier poster was dead-on with his suggestion