[mythtv-users] HD PVR Blaster Part Number

[Hika van den Hoven]

Hoi Jon,

Wednesday, January 14, 2015, 9:42:18 PM, you wrote:

> On Wed, Jan 14, 2015 at 2:37 PM, Kris Jensen
> <kris.jensen.knj at gmail.com> wrote:

> You could try making one.

> I am fairly sure that all you well need is any IR LED running at a
> wavelength 940nm and power requirements lower or around 1.5v 50mil
> amps.  a length of wire. and a 3/16" or 1/8"  jack (I cant remember the jack size)

> All easy to scrap from old remotes and stuff, if you have it laying around

> Or new.  IR emitters can be had for under a dollar.

> Just a suggestion.

> Kris 

> On Wed, Jan 14, 2015 at 3:07 PM, Jon Heizer <jheizer at gmail.com> wrote:

> Before I order a replacement cable from hauppauge for $13+, does
> anyone happen to know a part number for the IR emitter itself? 
> After years of use it seems mine has died.

> Thanks,

> Jon

> Thank you! The proper wavelength and specs was what I needed since
> I have everything else.  And I was just looking to see if there was a remote I could gut...

> Thanks again,

> Jon


See also http://www.lirc.org/receivers.html For further links and what
parts to use.


Tot mails,
  Hika                            mailto:hikavdh at gmail.com

"Zonder hoop kun je niet leven
Zonder leven is er geen hoop
Het eeuwige dilemma
Zeker als je hoop moet vernietigen om te kunnen overleven!"

De lerende Mens