[mythtv-users] Can't get HD TV channels working

[John Pilkington]

On 28/04/15 14:33, Hika van den Hoven wrote:
> Hoi John,
>
> Tuesday, April 28, 2015, 3:21:24 PM, you wrote:
>
>> On 28/04/15 13:25, Hika van den Hoven wrote:
>>> Hoi John,
>>>
>>> Tuesday, April 28, 2015, 1:45:04 PM, you wrote:
>
>>>
>>>> ...and I think it might be worth checking that you really /are/ using
>>>> the device that you intend to use.  At present a reboot still puts my
>>>> tuners in quasi-random order and I have to unplug/replug my usb device,
>>>> perhaps several times, to make sure it's properly initialised.  dmesg |
>>>> grep adapter can be useful.
>>>
>>> Why not use udev to create them consistent? Even if you have two equal
>>> devices you can distinguish them by pci or usb ID. You then of cause
>>> have to plug them always in the same port!
>
>> Good question.  Because life's too short.  I believe I have my desired
>> order set up in /etc/modprobe.d/dvb.conf, but it's not working.  With my
>> current kernel (from SL7) the order does seem consistent, but not in
>> accord with that and what I have mythtvsetup expecting.  I suspect dvb
>> isn't much used at the Fermi National (USA) Accelerator Laboratory :-)
>
> If you give output to:
> udevadm info --attribute-walk --name <your-device>
> I'll give you a setup for a rule.
>

That's a great offer, thanks. But I haven't found a name it likes.

Here's what dmesg finds:

saa7134 0000:07:04.0: DVB: registering adapter 0 frontend 0 (Philips 
TDA10046H DVB-T)...
usb 2-2: DVB: registering adapter 1 frontend 0 (Kworld UB499-2T 
T09(IT9137)_1)...
usb 2-2: DVB: registering adapter 2 frontend 0 (Kworld UB499-2T 
T09(IT9137)_2)...


modprobe  saa7134_dvb
modprobe dvb-usb-af9035

John