[mythtv-users] EPG Anomaly

[Andréas Kühne]

2015-04-25 0:36 GMT+02:00 Ken Smith <kens at kensnet.org>:

> Michael T. Dean wrote:
>
>> On 04/24/2015 02:52 PM, Simon Hobson wrote:
>>
>>> Ken Smith wrote:
>>>
>>>  Have you checked to verify that EIT is enabled on that particular
>>>>> channel (the one on the Video Source for the DVB-T tuners)?  Perhaps it was
>>>>> accidentally disabled.
>>>>>
>>>> Isn't that a setting for the tuner as a whole? And I get EPG's for
>>>> other muxes via that same tuner
>>>>
>>> Both. There's a setting to allow the tuner to be used for EIT, and a
>>> separate setting for each channel.
>>>
>>
>> And another for the Video Source.
>>
>> This allows you to:
>>
>>   a) Use only certain tuners for EIT collection (tuner EIT setting)
>>   b) Disable EIT collection on only certain channels so that you can use
>> EIT for some channels and XMLTV/SD for other channels on the same Video
>> Source (though never use both on any channel)
>>  c) Disable EIT collection on every single channel on a Video Source so
>> you can use XMLTV/SD for all the channels on that Source without having to
>> disable EIT on every single channel in the source
>>
>> Mike
>>
>>  Thanks for the pointers. I've checked those settings. For the channel
> "useonairguide" is set to "1" and the other settings are also set to use
> the broadcast EIT.
>
> Another DVB receiver plugged into the same antenna feed receives the EIT.
>
> Very odd.
>
> And other ideas?
>
> Ken
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>

I remember when I setup my channels I had to scan for the channels in
mythtvsetup and not import them from a channel listing. Importing the
channels, some setting for the channel didn't get set and the
"useonairguide" setting didn't override it. I now have all of my channels
scanned and receive updates on all channels. If you add a new videosource
you should be able to scan for the channels and that way get the correct
settings.

Regards,

Andréas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20150427/6c1ca8f5/attachment.html>