[mythtv-users] Wake up frontend with remote

[Josu Lazkano]

Hello,

I am trying to configure the frontend machine to wake up from a remote
key (POWER).

I am using Sapphire remote and receiver. This is what lsusb shows:

Bus 002 Device 005: ID 0766:0204 Jess-Link Products Co., Ltd TopSpeed
Cyberlink Remote Control

In "/proc/acpi/wakeup" all USB are disabled:

# cat /proc/acpi/wakeup
Device S-state  Status   Sysfs node
P0P1  S4 *disabled
USB1  S3 *disabled
USB2  S3 *disabled
USB3  S3 *disabled
USB4  S3 *disabled
USB5  S3 *disabled
USB6  S3 *disabled
USB7  S3 *disabled
RP01  S4 *disabled  pci:0000:00:1c.0
PXSX  S4 *disabled
RP02  S4 *disabled
PXSX  S4 *disabled
RP03  S4 *disabled
PXSX  S4 *disabled
RP04  S4 *disabled
PXSX  S4 *disabled
RP05  S4 *disabled  pci:0000:00:1c.4
PXSX  S4 *enabled   pci:0000:03:00.0
RP06  S4 *disabled
PXSX  S4 *disabled
RP07  S4 *disabled
PXSX  S4 *disabled
RP08  S4 *disabled
PXSX  S4 *disabled
PEG0  S4 *disabled  pci:0000:00:01.0
PEGP  S4 *disabled
PEG1  S4 *disabled
PEG2  S4 *disabled
PEG3  S4 *disabled
GLAN  S4 *disabled
EHC1  S4 *enabled   pci:0000:00:1d.0
EHC2  S4 *enabled   pci:0000:00:1a.0
XHC  S4 *disabled
HDEF  S4 *disabled  pci:0000:00:1b.0
PWRB  S3 *enabled

I try to enable some of them, but nothing change:

echo USB1 > /proc/acpi/wakeup

Need I configure something in the BIOS?

I will appreciate your help, I want to use my remote to power on the frontend.

Thanks and best regards.

-- 
Josu Lazkano