[mythtv-users] Ceton Infinitv ETH 6 configuration

Greg Thompson gthompson20 at gmail.com
Mon Sep 2 13:42:22 UTC 2013


Mind sharing your patch? I started looking at the Ceton source and I was just going to remove the code on the define functions. 

    
      


    Greg

    —
Sent from Mailbox for iPhone

On Mon, Sep 2, 2013 at 9:36 AM, Matt Mossholder <matt at mossholder.com>
wrote:

> This is exactly the situation I'm seeing. Looks like I might want to submit
> my patch. I had been holding off, thinking I needed to make detuning
> optional, but it if it is going to start hitting all the tuners, then it
> making it an option probably isn't needed.
> On Aug 30, 2013 2:38 PM, <gthompson20 at gmail.com> wrote:
>> Hey Ron,
>>
>> I wanted to give your some info on this issue... as I am having it as well
>> with an Network Connected USB Tuner.... I can also send manua requests to
>> stream to the VLC from the Web Page, However when I try and use Myth I get
>> a Partial Lock... Tracing the logs like you asked give the following
>> results...
>>
>> The web page still appears to give the correct JSON when watching with
>> Firebig, However the issues appears to maybe be this command when
>> Mythbackend Starts:
>>
>> CetonSH (IP of Ceton) ClearProgramNumber()
>> Which shows the following in the Ceton LOGfile....
>>
>>  libcetonrtsp: object cetonmpeg0
>> Jan  1 00:04:25 ocur[21]: ocur: [0] rtp setup for client
>> 192.168.1.189:44778
>> Jan  1 00:04:26 ocur[21]: libcetontune: ERROR: Failed to set frequency on
>> instance 0
>> Jan  1 00:04:26 ocur[21]: ocur: WARNING: [0] Frequency set did not take.
>> Freq: 747000 Std 9
>> Jan  1 00:04:26 ocur[21]: ocur: WARNING: [0] Channel change failed
>> Jan  1 00:04:26 ocur[21]: ocur: [0] Getting pmt for program 3
>> Jan  1 00:04:30 ocur[21]: ocur: [0] Attempting to SetChannel (Channel=0
>> SourceId=0  Mode=0)
>> Jan  1 00:04:30 ocur[21]: ocur: WARNING: [0] Set channel in progress,
>> saving channel number request 0
>> Jan  1 00:04:31 ocur[21]: mpeg: WARNING: [ID-0] Failed to get pat
>> Jan  1 00:04:31 ocur[21]: ocur: ERROR: [0] No pat returned
>> Jan  1 00:04:31 ocur[21]: ocur: [0] PCR Lock: 0
>> Jan  1 00:04:31 ocur[21]: ocur: [0] Packets: 0 (0 - 0) Data Ready 0
>> Jan  1 00:04:31 ocur[21]: mpeg: [ID-0] ready 00000100 pkts 00000101 filter
>> 00000001 sections 00000101 no_filters 00000001 zero_pid 00000035
>> Jan  1 00:04:31 ocur[21]: libctn91xx: 0.6 read 00000101 comp 00000101
>> Jan  1 00:04:31 ocur[21]: mpeg: [ID-0] ready 00000100 pkts 00000101 filter
>> 00000001 sections 00000101 no_filters 00000001 zero_pid 00000035
>> Jan  1 00:04:31 ocur[21]: libctn91xx: 0.6 read 00000101 comp 00000101
>> One the Tuner gets hit with that command I no longer see any program ID’s
>> in the Tuner Page. Only way to return the tuner to normal operation is to
>> power cycle the tuner.
>>
>> I am using the latest Firmware, so I am guessing they have changed
>> something on you...
>>
>> Can you look into this?
>>
>> Greg Thomson
>>
>> Sent from Windows Mail
>>
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20130902/3fcba2fe/attachment.html>


More information about the mythtv-users mailing list