[mythtv-users] Analog side of HVR-1950 Tuner not working
Raymond Norton
admin at lctn.org
Fri Oct 18 18:06:12 UTC 2013
I've had my Hauppauge HVR-1950 USB tuner working in the past with mythtv (both Digital and Analog), but am not getting it to work with on my new install from the 12.04 Mythbuntu ISO .
Findings:
Channel scanning only works on digital side
No channels found on analog side .
Created channels 4,8,and 13 manually
VLC in PVR capture mode played video from my cable provider (channel 8) a couple times on its own. Did not choose channel. However, it only plays static at time of this message.
cat /dev/video0 >> output.mpg produces a file.
Syslog , dmesg, and mythbackend log messages
Dmesg:
[ 10.225047] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013
[ 10.870441] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.323511] RPC: Registered named UNIX socket transport module.
[ 11.323522] RPC: Registered udp transport module.
[ 11.323529] RPC: Registered tcp transport module.
[ 11.323535] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.471266] FS-Cache: Loaded
[ 11.509865] FS-Cache: Netfs 'nfs' registered for caching
[ 11.527601] init: failsafe main process (879) killed by TERM signal
[ 11.630526] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 11.727405] tveeprom 1-00a2: Hauppauge model 75111, rev D2F5, serial# 7379479
[ 11.727414] tveeprom 1-00a2: MAC address is 00:0d:fe:70:9a:17
[ 11.727420] tveeprom 1-00a2: tuner model is NXP 18271C2 (idx 155, type 54)
[ 11.727427] tveeprom 1-00a2: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[ 11.727432] tveeprom 1-00a2: audio processor is CX25843 (idx 37)
[ 11.727438] tveeprom 1-00a2: decoder processor is CX25843 (idx 30)
[ 11.727443] tveeprom 1-00a2: has radio, has IR receiver, has IR transmitter
[ 11.727456] pvrusb2: Supported video standard(s) reported available in hardware: PAL-M/N/Nc;NTSC-M/Mj/Mk;ATSC-8VSB/16VSB
[ 11.727462] pvrusb2: Initial video standard (determined by device type): NTSC-M
[ 11.727487] pvrusb2: Device initialization completed successfully.
[ 11.873619] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 12.055261] init: udev-fallback-graphics main process (897) terminated with status 1
[ 13.930151] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 14.044654] tda829x 1-0042: setting tuner address to 60
[ 14.165609] tda18271 1-0060: creating new instance
[ 14.205404] TDA18271HD/C2 detected @ 1-0060
[ 14.585435] tda18271: performing RF tracking filter calibration
[ 15.365892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.366990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.695857] audit_printk_skb: 30 callbacks suppressed
[ 15.695868] type=1400 audit(1382117645.711:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1135 comm="apparmor_parser"
[ 20.672751] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 20.691322] NFSD: starting 90-second grace period (net c191b040)
[ 28.278980] init: plymouth-stop pre-start process (1889) terminated with status 1
[ 28.656533] tda18271: RF tracking filter calibration complete
[ 28.705432] tda829x 1-0042: type set to tda8295+18271
[ 31.950557] pvrusb2: registered device video0 [mpeg]
[ 31.950575] DVB: registering new adapter (pvrusb2-dvb)
[ 34.088852] cx25840 1-0044: 0x0000 is not a valid video input!
[ 34.366963] usb 1-2: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[ 34.368481] tda829x 1-0042: type set to tda8295
[ 34.404202] tda18271 1-0060: attaching existing instance
syslog:
Oct 18 12:29:04 mythtv kernel: [ 517.712069] usb 1-2: new high-speed USB device number 5 using ehci-pci
Oct 18 12:29:04 mythtv kernel: [ 517.853690] usb 1-2: New USB device found, idVendor=2040, idProduct=7501
Oct 18 12:29:04 mythtv kernel: [ 517.853701] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 18 12:29:04 mythtv kernel: [ 517.853708] usb 1-2: Product: WinTV
Oct 18 12:29:04 mythtv kernel: [ 517.853714] usb 1-2: Manufacturer: Hauppauge
Oct 18 12:29:04 mythtv kernel: [ 517.853720] usb 1-2: SerialNumber: 7300-00-F0709A17
Oct 18 12:29:04 mythtv kernel: [ 517.854897] pvrusb2: Hardware description: WinTV HVR-1950 Model 751xx
Oct 18 12:29:04 mythtv mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:04.1/usb1/1-2"
Oct 18 12:29:04 mythtv mtp-probe: bus: 1, device: 5 was not an MTP device
Oct 18 12:29:04 mythtv kernel: [ 517.887981] pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71.
Oct 18 12:29:04 mythtv kernel: [ 517.888160] pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70.
Oct 18 12:29:04 mythtv kernel: [ 517.898575] cx25840 1-0044: cx25843-24 found @ 0x88 (pvrusb2_a)
Oct 18 12:29:04 mythtv kernel: [ 517.909438] pvrusb2: Attached sub-driver cx25840
Oct 18 12:29:04 mythtv kernel: [ 517.920136] tuner 1-0042: Tuner -1 found with type(s) Radio TV.
Oct 18 12:29:04 mythtv kernel: [ 517.920184] pvrusb2: Attached sub-driver tuner
Oct 18 12:29:06 mythtv kernel: [ 520.076416] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Oct 18 12:29:07 mythtv kernel: [ 520.173417] tveeprom 1-00a2: Hauppauge model 75111, rev D2F5, serial# 7379479
Oct 18 12:29:07 mythtv kernel: [ 520.173427] tveeprom 1-00a2: MAC address is 00:0d:fe:70:9a:17
Oct 18 12:29:07 mythtv kernel: [ 520.173441] tveeprom 1-00a2: tuner model is NXP 18271C2 (idx 155, type 54)
Oct 18 12:29:07 mythtv kernel: [ 520.173448] tveeprom 1-00a2: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
Oct 18 12:29:07 mythtv kernel: [ 520.173453] tveeprom 1-00a2: audio processor is CX25843 (idx 37)
Oct 18 12:29:07 mythtv kernel: [ 520.173458] tveeprom 1-00a2: decoder processor is CX25843 (idx 30)
Oct 18 12:29:07 mythtv kernel: [ 520.173464] tveeprom 1-00a2: has radio, has IR receiver, has IR transmitter
Oct 18 12:29:07 mythtv kernel: [ 520.173478] pvrusb2: Supported video standard(s) reported available in hardware: PAL-M/N/Nc;NTSC-M/Mj/Mk;ATSC-8VSB/16VSB
Oct 18 12:29:07 mythtv kernel: [ 520.173484] pvrusb2: Initial video standard (determined by device type): NTSC-M
Oct 18 12:29:07 mythtv kernel: [ 520.173507] pvrusb2: Device initialization completed successfully.
Oct 18 12:29:07 mythtv kernel: [ 520.173761] pvrusb2: registered device video0 [mpeg]
Oct 18 12:29:07 mythtv kernel: [ 520.173774] DVB: registering new adapter (pvrusb2-dvb)
Oct 18 12:29:09 mythtv kernel: [ 522.375908] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Oct 18 12:29:09 mythtv kernel: [ 522.488530] tda829x 1-0042: setting tuner address to 60
Oct 18 12:29:09 mythtv kernel: [ 522.513426] tda18271 1-0060: creating new instance
Oct 18 12:29:09 mythtv kernel: [ 522.553533] TDA18271HD/C2 detected @ 1-0060
Oct 18 12:29:09 mythtv kernel: [ 522.933530] tda18271: performing RF tracking filter calibration
Oct 18 12:29:23 mythtv kernel: [ 536.976628] tda18271: RF tracking filter calibration complete
Oct 18 12:29:23 mythtv kernel: [ 537.025510] tda829x 1-0042: type set to tda8295+18271
Oct 18 12:29:29 mythtv kernel: [ 542.173518] cx25840 1-0044: 0x0000 is not a valid video input!
Oct 18 12:29:29 mythtv kernel: [ 542.262758] usb 1-2: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
Oct 18 12:29:29 mythtv kernel: [ 542.264778] tda829x 1-0042: type set to tda8295
Oct 18 12:29:29 mythtv kernel: [ 542.301025] tda18271 1-0060: attaching existing instance
mythbackend.log
switch: 0 mode_switch: 0
Oct 18 12:25:28 mythtv mythbackend[2721]: E TVRecEvent v4lchannel.cpp:450 (GetCurrentChannelNum) V4LChannel(/dev/video0): GetCurrentChannelNum(): Failed to find Channel
--
Raymond Norton
LCTN
952.955.7766
--
Sent From My Desktop
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20131018/154adb7a/attachment.html>
More information about the mythtv-users
mailing list