[mythtv-users] Ceton Infinitv USB issues

Tue Jan 29 03:35:22 UTC 2013

I'm a greenhorn at this myself, but have you tried setting the tuner in 
mythtv to 192.168.180.3, the same as is listed for the usb0? I believe 
that you use two addresses for this card. One for the browser app and 
one for the actual tuners.

I had problems using a PCIe card via RTP and ended up using the 
/dev/ctn* devices instead. Someone at Ceton is looking at my problem.

Frank

On 13-01-28 07:38 PM, michael helmer wrote:
> I am having problems getting my Ceton USB device working in mythTV. 
> Currently everything works as expected in Media Center.
>
> I can access the Ceton diagnostic page at 192.168.180.1 however once 
> configured in mythtv-setup the backend exits repeatedly.
>
> Here is the usb0 device showing up with the default IP:
>
> eth0      Link encap:Ethernet  HWaddr 00:26:18:6d:c9:80
>           inet addr:192.168.0.198  Bcast:192.168.0.255  Mask:255.255.255.0
>           inet6 addr: fe80::226:18ff:fe6d:c980/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:33016 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:22771 errors:0 dropped:0 overruns:0 carrier:1
>           collisions:0 txqueuelen:1000
>           RX bytes:37467025 (37.4 MB)  TX bytes:2947229 (2.9 MB)
>           Interrupt:46
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:492325 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:492325 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:75994895 (75.9 MB)  TX bytes:75994895 (75.9 MB)
>
> usb0      Link encap:Ethernet  HWaddr b6:dc:72:b2:23:96
>           inet addr:192.168.180.3  Bcast:192.168.180.255 
>  Mask:255.255.255.0
>           inet6 addr: fe80::b4dc:72ff:feb2:2396/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:4497 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:3553 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:1422594 (1.4 MB)  TX bytes:432422 (432.4 KB)
>
> Mythbackend complains that all four tuners are unavailable?
>
> @Bun2:~/Desktop/infinitv-usbd-0.1.0$ mythbackend
> 2013-01-28 19:28:52.909743 C  mythbackend version: fixes/0.26 
> [v0.26.0-89-g14aa707] www.mythtv.org <http://www.mythtv.org>
> 2013-01-28 19:28:52.909759 C  Qt version: compile: 4.8.1, runtime: 4.8.1
> 2013-01-28 19:28:52.909762 N  Enabled verbose msgs:  general
> 2013-01-28 19:28:52.909769 N  Setting Log Level to LOG_INFO
> 2013-01-28 19:28:52.910426 I  Setup Interrupt handler
> 2013-01-28 19:28:52.910433 I  Setup Terminated handler
> 2013-01-28 19:28:52.910439 I  Setup Segmentation fault handler
> 2013-01-28 19:28:52.910444 I  Setup Aborted handler
> 2013-01-28 19:28:52.910443 I  Added logging to the console
> 2013-01-28 19:28:52.910449 I  Setup Bus error handler
> 2013-01-28 19:28:52.910454 I  Setup Floating point exception handler
> 2013-01-28 19:28:52.910458 I  Setup Illegal instruction handler
> 2013-01-28 19:28:52.910466 I  Setup Real-time signal 0 handler
> 2013-01-28 19:28:52.910492 N  Using runtime prefix = /usr
> 2013-01-28 19:28:52.910502 N  Using configuration directory = 
> /home/mhelmer/.mythtv
> 2013-01-28 19:28:52.910551 I  Assumed character encoding: en_US.UTF-8
> 2013-01-28 19:28:52.911035 N  Empty LocalHostName.
> 2013-01-28 19:28:52.911040 I  Using localhost value of Bun2
> 2013-01-28 19:28:52.911137 I  Testing network connectivity to 
> '192.168.0.198'
> 2013-01-28 19:28:52.914623 I  Starting IO manager (read)
> 2013-01-28 19:28:52.914630 I  Starting process signal handler
> 2013-01-28 19:28:52.914696 I  Starting IO manager (write)
> 2013-01-28 19:28:52.914779 I  Starting process manager
> 2013-01-28 19:28:53.101523 N  Setting QT default locale to en_US
> 2013-01-28 19:28:53.101675 I  Current locale en_US
> 2013-01-28 19:28:53.101769 N  Reading locale defaults from 
> /usr/share/mythtv//locales/en_us.xml
> 2013-01-28 19:28:53.116256 I  Current MythTV Schema Version 
> (DBSchemaVer): 1307
> 2013-01-28 19:28:53.117281 I  Loading en_us translation for module 
> mythfrontend
> 2013-01-28 19:28:53.118472 N  MythBackend: Starting up as the master 
> server.
> 2013-01-28 19:28:53.144739 I  Added logging to mythlogserver at TCP:35327
> 2013-01-28 19:28:53.185238 E  CetonSH(192.168.180.1-0.0): Tuner device 
> unavailable
> 2013-01-28 19:28:53.275488 E  ChannelBase: CreateChannel() Error: 
> Failed to open device 192.168.180.1-0.0
> 2013-01-28 19:28:53.277662 E  Problem with capture cardsCard 9failed init
> 2013-01-28 19:28:53.320453 E  CetonSH(192.168.180.1-0.1): Tuner device 
> unavailable
> 2013-01-28 19:28:53.406095 E  ChannelBase: CreateChannel() Error: 
> Failed to open device 192.168.180.1-0.1
> 2013-01-28 19:28:53.408232 E  Problem with capture cardsCard 10failed init
> 2013-01-28 19:28:53.462107 E  CetonSH(192.168.180.1-0.2): Tuner device 
> unavailable
> 2013-01-28 19:28:53.548364 E  ChannelBase: CreateChannel() Error: 
> Failed to open device 192.168.180.1-0.2
> 2013-01-28 19:28:53.548893 E  Problem with capture cardsCard 11failed init
> 2013-01-28 19:28:53.596834 E  CetonSH(192.168.180.1-0.3): Tuner device 
> unavailable
> 2013-01-28 19:28:53.683642 E  ChannelBase: CreateChannel() Error: 
> Failed to open device 192.168.180.1-0.3
> 2013-01-28 19:28:53.684175 E  Problem with capture cardsCard 12failed init
> 2013-01-28 19:28:53.686030 I  Found 1 distinct programid authorities
> 2013-01-28 19:28:53.686343 I  New static DB connectionSchedCon
> 2013-01-28 19:28:53.691038 E  Failed listening on TCP 127.0.0.1:6544 
> <http://127.0.0.1:6544> - Error 8: The bound address is already in use
> 2013-01-28 19:28:53.691073 E  MediaServer::HttpServer Create Error
> 2013-01-28 19:28:53.692506 E  Failed listening on TCP 127.0.0.1:6543 
> <http://127.0.0.1:6543> - Error 8: The bound address is already in use
> 2013-01-28 19:28:53.692519 C  Backend exiting, MainServer 
> initialization error.
>
>
> I am running 12.04 with .26
>
> mythbackend --version
> Please attach all output as a file in bug reports.
> MythTV Version : v0.26.0-89-g14aa707
> MythTV Branch : fixes/0.26
> Network Protocol : 75
> Library API : 0.26.20130112-1
> QT Version : 4.8.1
> Options compiled in:
>  linux profile use_hidesyms using_alsa using_oss using_pulse 
> using_pulseoutput using_backend using_bindings_perl 
> using_bindings_python using_bindings_php using_crystalhd using_dvb 
> using_firewire using_frontend using_hdhomerun using_ceton using_hdpvr 
> using_iptv using_ivtv using_joystick_menu using_libcec using_libcrypto 
> using_libdns_sd using_libxml2 using_lirc using_mheg using_opengl_video 
> using_qtwebkit using_qtscript using_qtdbus using_v4l2 using_x11 
> using_xrandr using_xv using_bindings_perl using_bindings_python 
> using_bindings_php using_mythtranscode using_opengl using_vaapi 
> using_vdpau using_ffmpeg_threads using_live using_mheg using_libass 
> using_libxml2
>
>
> Any help would be appreciated.
>
> Thanks,
>
> -- 
> Michael
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20130128/98817c66/attachment.html>