[mythtv-users] Installation/Setup Problems

[Mick Sulley]

Hi,

I have just installed MythTV on a fresh install of Debian Wheezy, I seem 
to have a few problems and I'm not sure which are cause and which are 
effect.

When I run the frontend setup I cannot see any tuners and it completes 
with a message that the backend is not running

I have tried to install drivers from TBS, downloaded unpacked etc but 
when I run make I get -

    root at dmyth:~/tbs/linux-tbs-drivers# make
    make -C /root/tbs/linux-tbs-drivers/v4l
    make[1]: Entering directory `/root/tbs/linux-tbs-drivers/v4l'
    Updating/Creating .config
    Preparing to compile for kernel version 3.2.0
    File not found: /lib/modules/3.2.0-4-amd64/build/.config at
    ./scripts/make_kconfig.pl line 33, <IN> line 4.
    make[1]: *** No rule to make target `.myconfig', needed by
    `config-compat.h'.  Stop.
    make[1]: Leaving directory `/root/tbs/linux-tbs-drivers/v4l'
    make: *** [all] Error 2
    root at dmyth:~/tbs/linux-tbs-drivers#

When I run the backend I get errors -

    myth at dmyth:~$ mythbackend
    2013-12-22 21:53:38.777513 C  mythbackend version:  [v0.26.1]
    www.mythtv.org
    2013-12-22 21:53:38.777537 C  Qt version: compile: 4.8.2, runtime: 4.8.2
    2013-12-22 21:53:38.777541 N  Enabled verbose msgs:  general
    2013-12-22 21:53:38.777559 N  Setting Log Level to LOG_INFO
    2013-12-22 21:53:38.777988 I  Added logging to the console
    2013-12-22 21:53:38.778776 I  Setup Interrupt handler
    2013-12-22 21:53:38.778793 I  Setup Terminated handler
    2013-12-22 21:53:38.778807 I  Setup Segmentation fault handler
    2013-12-22 21:53:38.778817 I  Setup Aborted handler
    2013-12-22 21:53:38.778829 I  Setup Bus error handler
    2013-12-22 21:53:38.778840 I  Setup Floating point exception handler
    2013-12-22 21:53:38.778852 I  Setup Illegal instruction handler
    2013-12-22 21:53:38.778872 I  Setup Real-time signal 0 handler
    2013-12-22 21:53:38.778922 N  Using runtime prefix = /usr
    2013-12-22 21:53:38.778941 N  Using configuration directory =
    /home/myth/.mythtv
    2013-12-22 21:53:38.779058 I  Assumed character encoding: en_GB.UTF-8
    2013-12-22 21:53:38.779675 N  Empty LocalHostName.
    2013-12-22 21:53:38.779687 I  Using localhost value of dmyth
    2013-12-22 21:53:38.797283 N  Setting QT default locale to en_GB
    2013-12-22 21:53:38.797382 I  Current locale en_GB
    2013-12-22 21:53:38.797447 N  Reading locale defaults from
    /usr/share/mythtv//locales/en_gb.xml
    2013-12-22 21:53:38.806146 I  Current MythTV Schema Version
    (DBSchemaVer): 1307
    2013-12-22 21:53:38.806689 I  Loading en_gb translation for module
    mythfrontend
    2013-12-22 21:53:38.807176 N  MythBackend: Starting up as the master
    server.
    2013-12-22 21:53:38.809892 E  TVRec(1): Problem finding starting
    channel, setting to default of '3'.
    2013-12-22 21:53:38.810077 W  DVBChan(1:): Opening DVB frontend
    device failed.
                 eno: No such file or directory (2)
    2013-12-22 21:53:38.810098 E  DVBChan(1:): Failed to open DVB
    frontend device due to fatal error or too many attempts.
    2013-12-22 21:53:38.810116 E  ChannelBase: CreateChannel() Error:
    Failed to open device
    2013-12-22 21:53:38.810183 E  Problem with capture cardsCard 1failed
    init
    2013-12-22 21:53:38.810218 W  MythBackend: No valid capture cards
    are defined in the database.
    2013-12-22 21:53:38.810831 E  Scheduler: No channel sources defined
    in the database

Is the basic problem that the drivers aren't loaded or that the backend 
isn't running?  Either way any ideas how I can fix it?

Thanks
Mick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20131222/69841824/attachment.html>