[mythtv-users] Ceton infinitv 6 Eth & mythtv?

[Gary Buhrmaster]

On Thu, Aug 22, 2013 at 2:27 AM, Matt Mossholder <matt at mossholder.com> wrote:
....
> OK, I think I have bottomed out the source of the issues. As part of the
> tests to see if the tuners are present, the backend sets the device to a
> channel, and then after confirming the device is accepting commands, sets
> the channel AND frequency to 0.
>
> In my tests, it seems that setting the frequency to 0 causes the tuner to
> fail, a high percentage of the time, and it only comes back with a power
> cycle. I've confirmed this from the web interface by setting to a channel,
> confirming lock, then tuning to 0/0, waiting, then tuning back to the
> channel. JUST changing the channel seems to not cause the issue.

Given you have a reproducer, you should be sure to open a ticket
with Ceton so that they can fix the issue (and release updated
firmware).  Regardless of what any app (including MythTV)
sends, the device should not lock up requiring a power cycle.

Gary