[mythtv-users] Hauppauge 1600 no audio / no sound

[Keith Mayfield]

So I tried this on my video card that produces sound
v4l2-ctl --device=/dev/video0 --set-ctrl volume=65535
and the volume increase quite a bit so I set it
v4l2-ctl --device=/dev/video0 --set-ctrl volume=50000
and it reduse the volume.
I tried the same commands on /dev/video1 and nothing changed

I did find that 
 v4l2-ctl --device=/dev/video1 -l
produce many lines but the line for volume:
 volume (int)    : min=0 max=65535 step=655 default=60928 value=62225 flags=slider

Any other suggestions?

--- On Tue, 10/16/12, jrh <jharbestonus at gmail.com> wrote:

From: jrh <jharbestonus at gmail.com>
Subject: Re: [mythtv-users] Hauppauge 1600 no audio / no sound
To: "Discussion about MythTV" <mythtv-users at mythtv.org>
Date: Tuesday, October 16, 2012, 7:55 PM

Message: 20
Date: Mon, 15 Oct 2012 16:48:18 -0700 (PDT)
From: Keith Mayfield <krmayfield at yahoo.com>
To: Discussion about MythTV <mythtv-users at mythtv.org>
Subject: Re: [mythtv-users] Hauppauge 1600 no audio / no sound (Keith
	Mayfield)
Message-ID:
	<1350344898.54403.YahooMailClassic at web121702.mail.ne1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

So I tried:
v4l2-ctl --device=/dev/video1 --set-ctrl volume=65535
and still no volume
Any other ideas?



--- On Mon, 10/15/12, jrh <jharbestonus at gmail.com> wrote:

From: jrh <jharbestonus at gmail.com>
Subject: Re: [mythtv-users] Hauppauge 1600 no audio / no sound (Keith Mayfield)
To: mythtv-users at mythtv.org
Date: Monday, October 15, 2012, 6:39 AM


There is a utility called v4l2-ctl that you can use to adjust audio volume for analog. I had to do this for the analog side of my Hauppauge HVR-2250.




If your card is indeed video1 instead of video0, then the next thing is to find out the range you can give it to do set-ctrl.  I am not sure of the syntax for finding the settings, but the man page for v4l2-ctl will show you how to find the numeric range to use.  For my HVR-2250, the range was -50 to +50 I believe. I set my volume to -5 with good results. Check to see what the range is for yours before using -5.
Regards
-----Inline Attachment Follows-----

_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://www.mythtv.org/mailman/listinfo/mythtv-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20121016/948530e6/attachment.html>